tag:blogger.com,1999:blog-378083212011-12-03T11:44:05.627+01:00Linux from Scratch para el portátil Samsung Q25Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.comBlogger341100tag:blogger.com,1999:blog-37808321.post-129474964435791722008-08-24T11:01:00.003+01:002008-08-24T11:13:14.375+01:00Para acceder a la unidad de dvd que tenemos en la dockstation y al puerto firewire necesitamos instalar los siguiente módulos:<br />sbp2<br />ohci1394<br />ieee1394<br /><br />Esto está en Device Drivers -> IEEE 1394 (FireWire) support. Y activamos como módulo:<br />IEEE 1394 (FireWire) support<br />OHCI-1394 support<br />SBP-2 support (Harddisks etc.)<br /><br />También necesitamos tenemos el soporte SCSI: Device Drivers -> SCSI device support. Y activamos como módulo:<br />SCSI device support<br />SCSI CDROM support<br /><br />Compilamos, instalamos y cargamos... tiene que aparecer en dmesg algo parecido a esto:<br />ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0202000-e02027ff] Max Packet=[2048] IR/IT contexts=[4/4]<br />ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...<br />ieee1394: Node added: ID:BUS[0-00:1023] GUID[0000f041a000b057]<br />ieee1394: Host added: ID:BUS[0-01:1023] GUID[0000f04120067e39]<br />SCSI subsystem initialized<br />scsi0 : SBP-2 IEEE-1394<br />ieee1394: sbp2: Logged into SBP-2 device<br />ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]<br />scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632B TM31 PQ: 0 ANSI: 0<br />Driver 'sr' needs updating - please use bus_type methods<br />sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray<br />Uniform CD-ROM driver Revision: 3.20<br />sr 0:0:0:0: Attached scsi CD-ROM sr0<br />sr 0:0:0:0: Attached scsi generic sg0 type 5<br />Driver 'sd' needs updating - please use bus_type methods<br /><br />Ahora tenemos la unidad dvd en /dev/sr0<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-12947496443579172?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-8006610944089173702008-07-13T13:23:00.008+01:002008-08-24T11:12:27.611+01:00Ahora vamos a conectar nuestro bluetooth-usb a nuestro portátil.<br /><br />El usb es de conceptronic, y lo primero es compilar los módulos:<br />Networking -> <m> Bluetooth subsystem support -> Aquí activar todas las opciones.<br />y en Bluetooth device drivers: <m> HCI USB driver y <m> HCI VHCI (Virtual HCI device) driver<br /><br />Una vez hecho, nos tenemos que instalar las utilidades desde http://www.bluez.org/download/:<br /><span style="font-weight: bold;">bluez-libs</span><br />./configure --prefix=/usr/local/bluetooth --localstatedir=/var<br /><br /><span style="font-weight: bold;">bluez-utils</span><br />Para instalar este paquete necesitamos <a href="http://people.suug.ch/%7Etgr/libnl/">libnl</a>; hay que aplicar el siguiente parche:<br /></m></m></m><pre class="FileContents">--- libnl-1.0/lib/route/link/vlan.c.orig 2008-01-16 22:59:21.000000000 -0800<br />+++ libnl-1.0/lib/route/link/vlan.c 2008-01-16 22:59:36.000000000 -0800<br />@@ -27,6 +27,9 @@<br />#include <netlink route="" link="" h=""><br /><br />#include <linux h=""><br />+#ifndef VLAN_FLAG_REORDER_HDR<br />+#define VLAN_FLAG_REORDER_HDR 0x01<br />+#endif<br /><br />/** @cond SKIP */<br /><br />#define VLAN_HAS_ID (1<<0)></linux></netlink></pre>./configure --prefix=/usr/local/bluetooth<br /><br />También necesitamos una versión actual de la glib, porque las utils utilizan una función relativamente nueva "g_timeout_add_seconds"<br /><br />Ahora instalamos las utils:<br />export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/bluetooth/lib/pkgconfig<br /><br /><m><m><m>CPPFLAGS=-I/usr/local/bluetooth/include LDFLAGS=-L/usr/local/usb/lib ./configure --prefix=/usr/local/bluetooth --localstatedir=/var --enable-alsa --enable-usb --enable-netlink --enable-tools --enable-bccmd --enable-hid2hci --enable-dfutool --enable-hidd --enable-pand --enable-dund --enable-manpages --enable-configfiles --enable-initscripts --enable-pcmciarules --enable-debug --enable-test<br /><br />Una vez compilado e instalado también debemos copiar del directorio test el programa passkey-agent a /usr/local/bluetooth/bin<br /><br /><span style="font-weight: bold;">bluez-firmware</span><br /></m></m></m>./configure --prefix=/usr/local/bluetooth<br /><br /><m style="font-weight: bold;"><m><m>bluez-hcidump<br /></m></m></m>./configure --prefix=/usr/local/bluetooth<br /><br /><m><m><m>Si conectamos nuestro bluetooth debe aparcer en dmesg:<br />usb 1-1: USB disconnect, address 12<br />usb 1-1: new full speed USB device using uhci_hcd and address 13<br />usb 1-1: configuration #1 chosen from 1 choice<br />Bluetooth: Core ver 2.11<br />NET: Registered protocol family 31<br />Bluetooth: HCI device and connection manager initialized<br />Bluetooth: HCI socket layer initialized<br />Bluetooth: HCI USB driver ver 2.9<br />usbcore: registered new interface driver hci_usb<br /><br />Ahora levantamos el interfaz: hciconfig hci0 up<br /><br />Si ponemos hciconfig debe aparecer:<br />hci0: Type: USB<br /> BD Address: 00:80:5A:46:58:97 ACL MTU: 384:8 SCO MTU: 64:8<br /> UP RUNNING<br /> RX bytes:1845 acl:0 sco:0 events:41 errors:0<br /> TX bytes:153 acl:0 sco:0 commands:22 errors:0<br /><br />Para buscar los dispositivos: hcitool scan; tiene que aparecer una lista de los dispositivos a su alcance.<br /><br /></m></m></m><span style="font-family:courier new,courier;"> passkey-agent --default '1234' &amp; </span><br /><br />dejando en ejecución el programa que suministra la clave. Como esta solución parece poco elegante voy a utilizar udev para que ejecute el programa "passkey-agent" cada vez que conecte el dispositivo bluetooth usb. udev es un sistema que se encarga de la creación dinámica de dispositivos.<br /><br />Editamos un fichero llamado:<br /><span style="font-family:courier new,courier;"><br />/etc/udev/rules.d/60-reglasmias.rules</span><br /><br />y le añadimos la siguiente línea:<br /><span style="font-family:courier new,courier;"><br />ACTION=="add", SUBSYSTEM=="usb_device", SYSFS{idVendor}=="0a12", SYSFS{idProduct}=="0001", RUN+="/usr/bin/passkey-agent --default '1234'</span>"<br /><br />En resumidas cuentas, le estamos diciendo a udev que cuando de conecte el dispositvo con los idVendor e idProduct especificados ejecute el programa "passkey-agent".<br />Los valores de IdVendor e idProducto corrresponden a un adaptador bluetooth Conceptronics. Para averiguar los valores concretos en tu caso deberías ejecutar:<br /><br /><span style="font-family:courier new,courier;">lsusb</span><br /><br />para averiguar tus identificadores de dispositivo concretos.<br /><br />Una vez creado o modificado el fichero ejecutamos:<br /><br /><span style="font-family:courier new,courier;">start_udev</span><br /><br />para reiniciar los servicios udev. Ahora cada vez que conectamos el dispositivo USB bluetooth tendremos el programa "passkey-agent" en ejecución.<br /><br /><br />Audio:<br />En /usr/local/sonido/lib/alsa-lib, ln -s /usr/local/bluetooth/lib/alsa-lib/libasound_module_* .<br />En $HOME/.asoundrc<br />pcm.bluetooth {<br /> type bluetooth<br /> device 00:1A:80:45:AC:57<br /> profile "hifi"<br />}<br /><br />mplayer -ao alsa:device=bluetooth file.mp3<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-800661094408917370?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-57059307549746808342008-07-08T20:08:00.001+01:002008-07-08T20:10:58.522+01:00<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-5705930754974680834?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-35703748202477713992007-07-27T06:45:00.000+01:002007-07-27T13:04:25.624+01:00Para que linux pueda leer/escribir en el Zen V, necesitamos instalar la librería <a href="http://libmtp.sourceforge.net/">libmtp</a>. Para que la librería compile y funcione necesitas: primero que tengas montado el sistema de ficheros usbfs. Mira en /etc/fstab si tiene la siguiente línea:<br />none /proc/bus/usb usbdevfs noauto,devmode=0666 0 0<br /><br />También necesitas la librerías <a href="http://libusb.sourceforge.net/">libusb</a>:<br />tar xf libusb-0.1.12.tar.gz<br />cd libusb-0.1.12<br />./configure --prefix=/usr/local/usb<br />make<br />#Como root<br />make install<br /><br />Para que el configure de la libmtp encuentre bien la libusb:<br />export LDFLAGS=-L/usr/local/usb/lib<br />export CPPFLAGS=-I/usr/local/usb/include<br /><br />Ahora compilamos la libmtp:<br />tar xf libmtp-0.1.5.tar.gz<br />cd libmtp-0.1.5<br />./configure --prefix=/usr/local/zen<br />make<br />#Como root<br />make install<br />cp libmtp.rules /etc/udev/rules.d/82-mtp.rules<br />udevcontrol reload_rules<br /><br />Si ahora conectamos el Zen en /dev se crearán varios enlaces simbólicos mtp -> usbdev. Lo puedes ver poniendo ls -lrt /dev<br /><br />Vamos a probar si le detecta nuestro Zen. /usr/local/zen/bin/mtp-detect. Tiene que salir info del Zen.<br /><br />Para instalar un entorno gráfico busca en la página de libmtp sección Downstream el que más te guste.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-3570374820247771399?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-54969990197119452012007-01-17T08:04:00.000+01:002007-01-17T08:08:14.963+01:00Me he comprado la Wii y la he configurado con WPA, para hacerlo compatible he puesto el router utilice wpa y wpa2, y encripción TKIP y AES...<br /><br />Ademas he modificado el fichero de configuración /usr/local/wifi/etc/wpa:<br />ctrl_interface=/var/run/wpa_supplicant<br />ctrl_interface_group=0<br /><br />ap_scan=1<br /><br />network={<br />ssid="MISSSID"<br />scan_ssid=1<br />psk="XXXXXXXX"<br />}<br /><br />Para que el propio wpa_supplicant decida que utlizar.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-5496999019711945201?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-31402451829163871532007-01-03T20:19:00.000+01:002007-01-03T20:24:18.350+01:00Con mi router wireless Comtrend HG536+ tengo problemas para identificarme mediante WPA, he configurado el router a WPA2 y en /usr/local/wifi/etc/wpa modifica a proto=WPA2.<br /><br />Y parece que funciona.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-3140245182916387153?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-65614907454882052882006-12-23T20:52:00.000+01:002006-12-25T20:54:30.850+01:00Nos bajamos <a href="http://hostap.epitest.fi/releases/wpa_supplicant-0.4.9.tar.gz">wpa_supplicant</a>. Editamos el fichero defconfig y descomentamos la línea CONFIG_DRIVER_IPW=y. También he añadido la lineas:<br />CFLAGS += -I/usr/local/ssh/include<br />LIBS += -L/usr/local/ssh/lib<br /><br />Porque en /usr/local/ssh es donde tengo el OpenSSL y por último sed -i "s:-lcrypto:/usr/local/ssh/lib/libcrypto.a -ldl:g" Makefile<br /><br />y copiamos el fichero defconfig a .config<br /><br />Ahora make, después copiaremos los ejecutables wpa_cli y wpa_supplicant a el directorio /usr/local/wifi/sbin<br /><br />Ahora creamos el archivo de configuración /usr/local/wifi/etc/wpa:<br />ctrl_interface=/var/run/wpa_supplicant<br />ctrl_interface_group=0<br /><br />#Si ocultamos el SSID en el router<br />ap_scan=2<br /><br />network={<br /> ssid="MISSSID"<br /> scan_ssid=1<br /> proto=WPA<br /> key_mgmt=WPA-PSK<br /> pairwise=TKIP<br /> group=TKIP<br /> psk="XXXXXXXX"<br />}<br /><br />Y lo lanzamos: /usr/local/wifi/sbin/wpa_supplicant -c /usr/local/wifi/etc/wpa -i eth1 -D wext -dd<br /><br />Para comprobar que estamos conectados: /usr/local/wifi/sbin/wpa_cli status<br />Selected interface 'eth1'<br />bssid=00:16:38:c4:b9:51<br />ssid=MISSSID<br />pairwise_cipher=TKIP<br />group_cipher=TKIP<br />key_mgmt=WPA-PSK<br />wpa_state=COMPLETED<br />ip_address=192.168.1.20<br /><br />Ya podemos levantar el interfaz: ifup eth1 ipv4<br /><br />Para parar wpa_supplicant, /usr/local/wifi/sbin/wpa_cli terminate<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-6561490745488205288?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-58558107677288804432006-12-16T18:50:00.000+01:002006-12-19T13:36:05.107+01:00SynPS/2 Synaptics TouchPad es que tengo instalado. Para que lo detecte bien las xorg, nos bajamos el paquete <a href="http://web.telia.com/~u89404340/touchpad/files/">Synaptics</a>.<br /><br />Desempaquetamos, make y copiamos synaptics_drv.so a /usr/xorg/lib/X11/modules/input<br /><br />Ahora lo configuramos /etc/X11/xorg.conf:<br /><br />Section "ServerLayout"<br />...<br /> InputDevice "Synaptics Mouse" "AlwaysCore"<br />...<br />EndSection<br /><br />Section "Module"<br />...<br /> Load "synaptics"<br />...<br />EndSection<br /><br />Section "InputDevice"<br />Identifier "Synaptics Mouse"<br />Driver "synaptics"<br />Option "Device" "/dev/psaux"<br />Option "Protocol" "auto-dev"<br />Option "LeftEdge" "1700"<br />Option "RightEdge" "5300"<br />Option "TopEdge" "1700"<br />Option "BottomEdge" "4200"<br />Option "FingerLow" "25"<br />Option "FingerHigh" "30"<br />Option "MaxTapTime" "180"<br />Option "MaxTapMove" "220"<br />Option "VertScrollDelta" "100"<br />Option "MinSpeed" "0.09"<br />Option "MaxSpeed" "0.18"<br />Option "AccelFactor" "0.0015"<br />Option "SHMConfig" "on"<br />EndSection<br /><br />Además del driver se han creado dos ejecutables, synclient y syndaemon. Con syndaemon podemos deshabilitar el touchpad cuando estamos escribiendo: syndaemon -i 1 -d.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-5855810767728880443?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-14438888068099935172006-12-15T17:20:00.000+01:002006-12-19T13:36:46.187+01:00Nos vamos al kernel:<br /><br />Device Drivers -> SCSI device support -><br />&lt;M&gt; SCSI device support<br />[*] legacy /proc/scsi/ support<br />&lt;M&gt; SCSI disk support<br /><br />Device Drivers -> USB support -> <br />&lt;M&gt; Support for Host-side USB<br />[ ] USB verbose debug messages<br />[*] USB device filesystem<br />&lt;M&gt; EHCI HCD (USB 2.0) support<br />&lt;M&gt; UHCI HCD (most Intel and VIA) support<br />&lt;M&gt; USB Mass Storage support<br />[ ] USB Mass Storage verbose debug<br />[*] Datafab Compact Flash Reader support (EXPERIMENTAL)<br />[*] Freecom USB/ATAPI Bridge support<br />[*] ISD-200 USB/ATA Bridge support<br />[*] Microtech/ZiO! CompactFlash/SmartMedia support<br />[*] USBAT/USBAT02-based storage support (EXPERIMENTAL)<br />[*] SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)<br />[*] SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)<br />[*] Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)<br />[*] Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)<br />[ ] The shared table of common (or usual) storage devices<br />&lt;M&gt; USB Human Interface Device (full HID) support<br />[*] HID input layer support<br /><br />Ahora vamos cargando los módulos principales: usbcore, uhci_hcd<br /><br />Para pen drive necesitamos cargar, usb_storage, scsi_mod y sd_mod, la enganchar el pen drive se reará un dispositivo scsi, que puede ser sda, sdb. Para verlo dmesg.<br /><br />Ya sólo falta montar el dispositivo: mount /dev/sda1 /mnt/pendriver<br /><br />NOTA: Los pendriver normalmente están con un sistema de fichero FAT.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-1443888806809993517?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-37980482916672284642006-12-14T10:43:00.000+01:002006-12-19T13:37:28.780+01:00Vamos a instalar beryl un gestor de ventana OpenGL. Para ello nos bajamos los fuentes <a href="http://www.beryl-project.org/">beryl</a>, nos bajamos todos los ficheros svn:<br />svn co svn://svn.beryl-project.org/beryl/trunk beryl/<br /><br />* beryl-core-svn, tiene dependencias de startup-notification, libxcomposite, libxdamage, libgl, libpng, glib2, gconf. Libxcomposite y Libxdamage ya está instalados con el xorg. Es importante que esten los fuentes de beryl-mesa en el directorio ../beryl-mesa.<br />* beryl-plugins-svn, depende librsvg, aquí realmente no obliga a instalar GTK2<br />* beryl-manager-svn, depende GTK2.<br />* beryl-dbus-svn, depende dbus.<br />* beryl-settings-svn, depende GTK2.<br />* emerald-svn, depende libwnck.<br />* emerald-themes-svn.<br /><br />Con esto ya tendríamos el systema montado, si queremos una integración con kde instalaramos aquamarine-svn, si es con gnome heliodor-svn<br /><br />Para compilar tenemos que hacer hacerlo por orden (ver arriba) y... ./autogen.sh --prefix=/usr/local/beryl-svn<br /><br />Como no tengo instalado las dependencias en /usr, sino directorios diferentes tengo que decirselo a la utilidad aclocal:<br />export ACLOCAL="aclocal -I /usr/local/pkgconfig/share/aclocal -I /usr/local/gtk2/share/aclocal -I /usr/local/gnome/share/aclocal"<br /><br />Una vez terminado de compilar modificamos el .xinitrc:<br />export PATH=$PATH:/usr/local/beryl-svn/bin:/usr/local/gnome/bin:/usr/local/gtk2/bin<br /><br />emerald &<br />beryl-manager &<br /><br />beryl --indirect-rendering --strict-binding dbus settings &<br /><br />xterm<br /><br />Para integrarlo con xfce:<br />xrdb $HOME/.Xresources<br /><br /># start beryl and beryl-manager<br />emerald &<br />beryl --indirect-rendering --strict-binding &<br />beryl-manager &<br />startxfce4<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-3798048291667228464?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-80591444586170571182006-12-13T00:40:00.000+01:002006-12-19T13:38:18.147+01:00El siguiente paso es hacer funcionar el USB, concretamente un pen driver (genérico), un mp3 (creative) y el ratón usb.<br /><br />Como voy a estar compilado continuamente el kernel y no quiero estar instalando el módulo de la tarjeta wireless, muevo el directorio wireless de /lib/modules/2.6.18.3/kernel/driver/net a /lib/modules/2.6.18.3/net<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-8059144458617057118?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-13294179090395448892006-12-11T15:39:00.000+01:002006-12-19T13:39:03.183+01:00Compilamos los módulos del kernel:<br /><br />Device Drivers -> Character devices -><br />&lt;*&gt; /dev/agpgart (AGP Support)<br />&lt;M&gt; Intel 440LX/BX/GX, I8xx and E7x05 chipset support<br />&lt;M&gt; Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)<br />&lt;M&gt; Intel 830M, 845G, 852GM, 855GM, 865G<br />&lt;M&gt; i915 driver<br /><br />En /etc/X11/xorg.conf añadimos en la sección "Device": Option "DRI" "True", en "Module": Load "dri", y añadimos la sección<br /><br />Section "DRI"<br /> Group "video"<br /> Mode 0660<br />EndSection<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-1329417909039544889?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-42952582412580886722006-12-11T08:32:00.000+01:002006-12-19T13:40:05.278+01:00Ya tengo todo instalado para xorg 7.1, sólo me falta los drivers. Me bajo todos y iré compiladon uno a uno lo que necesite.<br /><br />El touchpad es:<br />Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0<br />input: SynPS/2 Synaptics TouchPad as /class/input/input1<br /><br />Input: keyboard, mouse (para el touchpad).<br />Video: Para nuestra Intel Corporation 82852/855GM Integrated Graphics Device el driver es i810.<br /><br />Section "Device"<br /> Identifier "Card0"<br /> Driver "i810"<br /> VendorName "Intel Corporation"<br /> BoardName "82852/855GM Integrated Graphics Device"<br />EndSection<br /><br /><br /><br />Ok, startx y funciona. El touchpad funciona pero habrá que instalar un driver más especifico.<br /><br />Pero tenemos un problema direct rendering está Disabled, intentaremos solucionarlo.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-4295258241258088672?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-84350684451373889702006-12-09T14:52:00.000+01:002006-12-19T13:40:25.581+01:00Ok, ya lo he conseguido...<br /><br />echo 524288000 > /sys/power/image_size<br /><br />/usr/local/vbetool/sbin/vbetool vbestate save > /delme<br />sync ; echo -n platform > /sys/power/disk; echo -n mem > /sys/power/state<br />/usr/local/vbetool/sbin/vbetool vbetool post<br />/usr/local/vbetool/sbin/vbetool vbestate restore < /delme<br /><br />rm /delme<br /><br />/etc/rc.d/init.d/console start<br /><br /><br />Puede que necesites pulsar alguna tecla porque habrá saltado el protector de pantalla.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-8435068445137388970?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-34941587862225116812006-12-08T18:35:00.000+01:002006-12-19T13:40:53.459+01:00Para hacer más rápidas la compilaciones vamos a realizar un ramdisk, que no es otra cosa que un disco virtual en memoria.<br /><br />Activamos la opción del kernel Device Drivers -> Block devices -> &lt;M&gt; RAM disk support<br />Como voy a utilizar ext2 para el ramdisk, la reiserfs utiliza 33 Mb para empezar: File systems -> &lt;M&gt; Second extended fs support<br /><br />Ahora cargarmos el módulo, como quiero más de 4 Mb pongo la opción rd_size=100000, es decir, unos 100 Mb: modprobe rd rd_size=100000, y el módulo ext2.<br /><br />Ahora tengo que formatear la "disco" voy a formatearlo en ext2, , mke2fs /dev/ram0, luego lo monto mount /dev/ram0 sources -t ext2<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-3494158786222511681?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-50972658895311492572006-12-08T11:23:00.000+01:002006-12-19T13:41:28.550+01:00Volvamos a las fuentes del kernel...<br /><br />Device Drivers-><br /> Sound -><br /> &lt;M&gt; Sound card support<br /> Advanced Linux Sound Architecture -><br /> &lt;M&gt; Advanced Linux Sound Architecture<br /> &lt;M&gt; OSS Mixer API<br /> &lt;M&gt; OSS PCM (digital audio) API<br /> [*] OSS PCM (digital audio) API - Include plugin system<br /> &lt;M&gt; RTC Timer support<br /> [*] Support old ALSA API<br /> [*] Verbose procfs contents<br /> [*] Verbose printk<br /> PCI devices ---><br /> &lt;M&gt; Intel/SiS/nVidia/AMD/ALi AC97 Controller<br /><br />Compilamos, instalamos los módulos (hay que volver a reinstalar los driver de la wifi) y ahora a cargar el módulo snd_intel8x0 vemos la salida de dmesg<br />ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5<br />PCI: Setting latency timer of device 0000:00:1f.5 to 64<br />intel8x0_measure_ac97_clock: measured 59491 usecs<br />intel8x0: clocking to 48000<br /><br />Para tener compatibilidad OSS cargamos los módulos snd-mixer-oss y snd-pcm-oss<br /><br />Sólo nos queda instalar <a href="http://www.linuxfromscratch.org/blfs/view/svn/multimedia/libdriv.html#alsa">ALSA</a> para probar el sonido...<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-5097265889531149257?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-66493765204527470902006-12-08T10:30:00.000+01:002006-12-19T13:42:05.800+01:00Para activar el ahorro de energia en el disco necesitamos hdparm:<br />make<br />make binprefix=/usr/local/ manprefix=/usr/local/ install<br /><br />Probemos hdparm -I /dev/hda<br /><br />/dev/hda:<br /><br />ATA device, with non-removable media<br /> Model Number: FUJITSU MHV2040AT <br /> Serial Number: NS9CT5925NAG<br /> Firmware Revision: 00000096<br />Standards:<br /> Used: ATA/ATAPI-6 T13 1410D revision 3a<br /> Supported: 6 5 4<br />Configuration:<br /> Logical max current<br /> cylinders 16383 16383<br /> heads 16 16<br /> sectors/track 63 63<br /> --<br /> CHS current addressable sectors: 16514064<br /> LBA user addressable sectors: 78140160<br /> device size with M = 1024*1024: 38154 MBytes<br /> device size with M = 1000*1000: 40007 MBytes (40 GB)<br /><br />Capabilities:<br /> LBA, IORDY(cannot be disabled)<br /> Standby timer values: spec'd by Standard, no device specific minimum<br /> R/W multiple sector transfer: Max = 16 Current = ?<br /> Advanced power management level: 128 (0x80)<br /> Recommended acoustic management value: 254, current value: 254<br /> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5<br /> Cycle time: min=120ns recommended=120ns<br /> PIO: pio0 pio1 pio2 pio3 pio4<br /> Cycle time: no flow control=240ns IORDY flow control=120ns<br />Commands/features:<br /> Enabled Supported:<br /> * SMART feature set<br /> Security Mode feature set<br /> * Power Management feature set<br /> * Write cache<br /> * Look-ahead<br /> * Host Protected Area feature set<br /> * WRITE_BUFFER command<br /> * READ_BUFFER command<br /> * DOWNLOAD_MICROCODE<br /> * Advanced Power Management feature set<br /> Power-Up In Standby feature set<br /> * SET_MAX security extension<br /> * Automatic Acoustic Management feature set<br /> * Device Configuration Overlay feature set<br /> * Mandatory FLUSH_CACHE<br /> * SMART error logging<br /> * SMART self-test<br /> * IDLE_IMMEDIATE with UNLOAD<br /> * SMART Command Transport (SCT) feature set<br /> * SCT LBA Segment Access (AC2)<br /> * SCT Error Recovery Control (AC3)<br /> * SCT Features Control (AC4)<br /> * SCT Data Tables (AC5)<br />Security:<br /> Master password revision code = 65534<br /> supported<br /> not enabled<br /> not locked<br /> frozen<br /> not expired: security count<br /> not supported: enhanced erase<br /> 40min for SECURITY ERASE UNIT.<br />HW reset results:<br /> CBLID- above Vih<br /> Device num = 0 determined by the jumper<br />Checksum: correct<br /><br />Y ahora hdparm -Tt /dev/hda<br /><br />/dev/hda:<br />Timing cached reads: 1412 MB in 2.00 seconds = 706.00 MB/sec<br />Timing buffered disk reads: 80 MB in 3.02 seconds = 26.53 MB/sec<br /><br />Aplicamos hdparm -d1 -c3 -m16 -M128 /dev/hda<br /><br />Volvemos hacer hdparm -Tt /dev/hda<br />Timing cached reads: 1484 MB in 2.00 seconds = 741.98 MB/sec<br />Timing buffered disk reads: 80 MB in 3.01 seconds = 26.56 MB/sec<br /><br />Realmente no se nota el cambio. Pero el hdparm nos sistema para suspender el disco duro con la opción -Sn, donde n * 5 de segundos de inactividad para suspender el disco.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-6649376520452747090?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-27776215650330321782006-12-08T10:08:00.000+01:002006-12-19T13:43:04.788+01:00Para suspender:<br />sync ; echo platform > /sys/power/disk; echo mem > /sys/power/state<br /><br />El Q25 suspender se suspender, pero al despertarlo no se enviende la pantalla. Buscado por he encontrado una utilizadad vbetool que permite encender y apagar la pantalla.<br /><br />Para compilar vbetool necesitamos las PCI Utils:<br />sed -i 's/null ;/null 2>\&1 ;/' update-pciids.sh<br />make PREFIX=/usr/local/pciutils<br />make PREFIX=/usr/local/pciutils install<br /><br />install -v -m 755 -d /usr/local/pciutils/include/pci<br />install -v -m 755 -d /usr/local/pciutils/lib<br />install -v -m 644 lib/libpci.a /usr/local/pciutils/lib<br />install -v -m 644 lib/*.h /usr/local/pciutils/include/pci<br /><br />Para el update-pciids.sh, que actuliza la base de datos de lspci, necesitamos wget (ya lo tenemos) y which:<br /><br />cat > /usr/local/bin/which << "EOF"<br />#!/bin/bash<br />type -pa "$@" | head -n 1 ; exit ${PIPESTATUS[0]}<br />EOF<br />chmod -v 755 /usr/local/bin/which<br />chown -v root:root /usr/local/bin/which<br /><br />Actualizamos la base de datos: /usr/local/pciutils/sbin/update-pciids <br /><br />Ahora instalamos vbetool:<br />./configure --prefix=/usr/local/vbetool<br /><br />Editamos el Makefile: y en CPPFLAGS añadimos -I/usr/local/pciutils/include y buscamos todos lo sitios donde ponga $(libdir)/libpci.a lo reemplazamos por /usr/local/pciutils/lib/libpci.a<br /><br />make<br />make install<br /><br />Probamos...<br /><br />sync ; echo platform > /sys/power/disk; echo mem > /sys/power/state<br />/usr/local/vbetool/sbin/vbetool dpms on<br /><br />Pero no funciona :-(<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-2777621565033032178?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165533994885442842006-12-08T00:17:00.000+01:002006-12-19T13:43:29.587+01:00Para hibernar el Q25 hay que hacer:<br />#Amplio la imagen a mis 1,25 Gbytes: (1024 + 256) * 1024 * 1024<br /><br />echo 1342177280 > /sys/power/image_size<br />sync ; echo platform > /sys/power/disk; echo disk > /sys/power/state<br /><br />Para que al arrancar vaya al swap para recuperar, editar /boot/grub/menu.lst y en la opciones kernel añadir resume=/dev/hda3 (mi partición swap). Así es como quedaría:<br />kernel (hd0,1)/boot/bzImage-2.6.18.3 root=/dev/hda2 ro resume=/dev/hda3<br /><br />Al volver la consola no recupera el tipo de letra correcto, para recupelarla: /etc/rc.d/init.d/console start.<br /><br />Para que todo se automático creo el script:<br />echo 1342177280 > /sys/power/image_size<br />sync ; echo platform > /sys/power/disk; echo disk > /sys/power/state<br />/etc/rc.d/init.d/console start<br /><br />El comando sync vacía los buffers del disco.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116553399488544284?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165532338171284802006-12-07T23:41:00.000+01:002006-12-19T13:43:52.771+01:00Ya hemos visto el módulo processor.<br /><br />ac:<br />al cargar el módulo ac crea un fichero /proc/acpi/ac_adapter/ADP1/state indicando si está conectado a la red eléctrica (on-line) o no (off-line)<br /><br />thermal:<br />Crea el directorio /proc/acpi/thermal_zone/THRM con información sobre la temperatura del Q25. El fichero más interesante es temperature que nos indica la temperatura del cpu.<br /><br />fan:<br />Crea el fichero /proc/acpi/fan/FAN0/fan, el estado del ventilador.<br /><br />dock:<br />Según la documentación del kernel añade soporte para ACPI controle las dock stations.<br /><br />button:<br />crea en /proc/acpi/button los directorios lid/* power/* sleep/*. /proc/acpi/button/lid/LID0/state nos indica si está levantada la tapa o no del Q25.<br /><br />battery:<br />Crea /proc/acpi/battery/BAT1 con información de la bateria y consumo. El fichero info nos da información de la bateria y state con el estado cargando/descargando, consumo en eso momento y energia almacenada.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116553233817128480?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165528734089175512006-12-07T22:56:00.000+01:002006-12-19T13:45:04.390+01:00Vemos a que velocidad corre nuestro procesador:<br />cat /proc/cpuinfo<br /><br />cpu MHz : 1594.910<br /><br />modprobe speedstep-centrino<br /><br />Esto carga los módulos speedstep_centrino, freq_table, processor<br /><br />dmesg:<br />Time: acpi_pm clocksource has been installed.<br />ACPI: CPU0 (power states: C1[C1] C2[C2])<br />ACPI: Processor [CPU0] (supports 2 throttling states)<br /><br />Y crea el directorio /sys/devices/system/cpu/cpu0/cpufreq. En este directorio hay varios ficheros que nos sirve para dar órdenes y obtener información. El que nos interesa es scaling_governor, es aquí donde vamos a decirle cual va a ser la política de frecuencia del procesador. Por defecto hemos decidido que sea performance, que significa que el procesador irá a 1,6 Ghz. Tenemos 4 políticas:<br /> a) performance. Mayor frecuencia de procesador siempre. 1,6 Ghz<br /> b) powersave. Menor frecuencia de procesador siempre. 600 Mhz<br /> c) userscape. La frecuencia que queramos dentro del rango: cat scaling_available_frequencies<br /> d) ondemand. Según la demanda.<br /> e) conservate. Según la demanda pero enfocado al ahorro.<br /><br />Las politicas que podemos utilizar están en el fichero scaling_available_governors. Por defecto sólo está performance. Yo utilizo conservate, así pues, modprobe cpufreq_conservative y lo activo: echo -n conservative > scaling_governor<br /><br />Volvemos hacer cat /proc/cpuinfo<br />cpu MHz : 600.000<br /><br />A mayor frecuencia mayor consumo y mayor calor disipado<br /><br />Lamentablemente no se puede poner por defecto la política conservative, así pues habrá que hacer un guión de arranque que lo haga.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116552873408917551?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165527628529795192006-12-07T22:22:00.000+01:002006-12-19T13:45:39.042+01:00Con las opciones de kernel de administración de la energía nos permite ver el consumo el Q25, cuanta batería queda, modificar la frecuencia de procesador, suspensión e hibernación, y demás opciones de ahorro de la energía.<br /><br />Hibernación:<br />Power management options (ACPI, APM) -> <br />[*] Power Management support<br />[*] Software Suspend <br />(/dev/hda3) Default resume partition<br /><br />/dev/hda3 es mi partición swap, esta debe ser el doble, al menos, de la memoria RAM que tenga el Q25. Yo tengo 1,25 G y una swap de 3 G<br /><br />ACPI:<br />Power management options (ACPI, APM) -> <br />[*] Power Management support<br /> ACPI (Advanced Configuration and Power Interface) Support -><br /> [*] ACPI Support<br /> [*] Sleep States (NEW)<br /> &lt;M&gt; AC Adapter<br /> &lt;M&gt; Battery<br /> &lt;M&gt; Button<br /> &lt;M&gt; Generic Hotkey<br /> &lt;M&gt; Fan<br /> &lt;M&gt; Dock<br /> &lt;M&gt; Processor<br /> &lt;M&gt; Thermal Zone (NEW)<br /><br />Frecuencia del procesador:<br />Power management options (ACPI, APM) -><br />[*] Power Management support<br />CPU Frequency scaling ---><br />[*] CPU Frequency scaling<br />&lt;M&gt; CPU frequency translation statistics<br />[*] CPU frequency translation statistics details<br /> Default CPUFreq governor (performance) ---><br />--- 'performance' governor<br />&lt;M&gt; 'powersave' governor<br />&lt;M&gt; 'userspace' governor for userspace frequency scaling<br />&lt;M&gt; 'ondemand' cpufreq policy governor<br />&lt;M&gt; 'conservative' cpufreq governor<br />&lt;M&gt; Intel Enhanced SpeedStep<br />[*] Use ACPI tables to decode valid frequency/voltage pairs (NEW)<br />[*] Built-in tables for Banias CPUs (NEW)<br /><br />Ok, salimos guardamos y compilar...<br /><br />Lo instalamos los módulos. Esto hace que perdamos el driver de la tarjeta wifi, lo cual entramos en las fuentes del driver y... make install<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116552762852979519?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165360714665725872006-12-06T00:16:00.000+01:002006-12-19T13:46:10.116+01:00Configuramos nuestro router wifi con encriptación wep y le ponemos una clave.<br /><br />Ponemos el essid y channel con en el caso anterior y añadir la opción key:<br />iwconfig eth1 essid TOLETUM channel 11 key restricted key s:CLAVE<br /><br /><br />Vemos si hemos conectado iwconfig eth1 tiene que tener puesto el "Access Point" la MAC del router.<br /><br />Y levantamos el interfaz.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116536071466572587?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165358775114239592006-12-05T23:37:00.000+01:002006-12-19T13:47:57.051+01:00Primero instalamos la paquete <a href="http://prdownload.berlios.de/dhcpcd/dhcpcd-2.0.8.tar.bz2">Dhcpcd-2.0.8</a>.<br /><br />tar xf dhcpcd-2.0.8.tar.bz2<br />cd dhcpcd-2.0.8<br />./configure --prefix="/usr/local/dhcp"<br />make<br />make install<br /><br />Luego en /etc/sysconfig/network-devices/services creamos el fichero dhcpcd:<br /># Based upon lfs-bootscripts-1.12 $network_devices/if{down,up}<br /># Rewritten by Nathan Coulson <nathan@linuxfromscratch.org><br /># Adapted for dhcpcd by DJ Lucas <dj@lucasit.com><br /><br />#$LastChangedBy: dnicholson $<br />#$Date: 2006-10-01 13:07:56 -0500 (Sun, 01 Oct 2006) $<br /><br />. /etc/sysconfig/rc<br />. $rc_functions<br />. $IFCONFIG<br /><br /><br />DAEMON="/usr/local/dhcp/sbin/dhcpcd"<br /><br />PIDFILE="/var/run/dhcpcd-$1.pid"<br />LEASEINFO="/var/lib/dhcpc/dhcpcd-$1.info"<br /><br />case "$2" in<br /> up)<br /> boot_mesg -n "Starting dhcpcd on the $1 interface..."<br /> # Test to see if there is a stale pid file<br /> if [ -f "$PIDFILE" ]<br /> then<br /> ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null<br /> if [ $? != 0 ]<br /> then<br /> rm -f /var/run/dhcpcd-$1.pid > /dev/null<br /> else<br /> boot_mesg "dhcpcd already running!" ${WARNING}<br /> echo_warning<br /> exit 2<br /> fi<br /> fi<br /> $DAEMON $1 $DHCP_START<br /> # Save the return value<br /> RET="$?"<br /> # Print the assigned settings if requested<br /> if [ "$RET" = "0" -a "$PRINTIP" = "yes" ]; then<br /> . /var/lib/dhcpc/dhcpcd-$1.info<br /> if [ "$PRINTALL" = "yes" ]; then<br /> echo ""<br /> echo_ok<br /> boot_mesg " DHCP Assigned Settings for $1:"<br /> boot_mesg_flush<br /> boot_mesg " IP Address: $IPADDR"<br /> boot_mesg_flush<br /> boot_mesg " Subnet Mask: $NETMASK"<br /> boot_mesg_flush<br /> boot_mesg " Default Gateway: $GATEWAY"<br /> boot_mesg_flush<br /> boot_mesg " DNS Server: $DNS"<br /> boot_mesg_flush<br /> else<br /> boot_mesg " IP Addresss: ""$IPADDR"<br /> echo_ok<br /> fi<br /> else<br /> echo ""<br /> $(exit "$RET")<br /> evaluate_retval<br /> fi<br /> ;;<br /><br /> down)<br /> boot_mesg -n "Stopping dhcpcd on the $1 interface..."<br /> # Do nothing with the client daemon if we have an infinate <br /> # lease time as the client exits when started in this case,<br /> # just echo OK.<br /> if [ -e $LEASEINFO ]<br /> then<br /> . $LEASEINFO<br /><br /> if [ "$LEASETIME" = "4294967295" ]<br /> then<br /> # do nothing, just echo ok<br /> echo ""<br /> echo_ok<br /> else<br /> if [ -n "$DHCP_STOP" ]<br /> then<br /> $DAEMON $1 $DHCP_STOP &> /dev/null<br /> RET="$?"<br /> if [ "$RET" -eq 0 ]; then<br /> echo ""<br /> echo_ok<br /> elif [ "$RET" -eq 1 ]; then<br /> boot_mesg "dhcpcd not running!" ${WARNING}<br /> echo_warning<br /> else<br /> echo ""<br /> echo_failure<br /> fi<br /> else<br /> echo ""<br /> killproc dhcpcd<br /> fi<br /> fi<br /> else<br /> boot_mesg -n "LEASEINFO Test failed! - " ${WARNING}<br /> boot_mesg "dhcpcd is not running!" ${WARNING}<br /> echo_warning<br /> exit 1<br /> fi<br /> ;;<br /><br /> *)<br /> echo "Usage: $0 [interface] {up|down}"<br /> exit 1<br /> ;;<br />esac<br /><br /># End $network_devices/services/dhcpcd<br /><br />chmod 755 dhcpcd<br /><br />Luego en /etc/sysconfig/network-devices/ifconfig.eth1 (nuestra interfaz wifi) creamos el fichero dhcpcd:<br />ONBOOT="no"<br />SERVICE="dhcpcd"<br />DHCP_START=""<br />DHCP_STOP="-k"<br /><br /># Set PRINTIP="yes" to have the script print<br /># the DHCP assigned IP address<br />PRINTIP="yes"<br /><br /># Set PRINTALL="yes" to print the DHCP assigned values for<br /># IP, SM, DG, and 1st NS. This requires PRINTIP="yes".<br />PRINTALL="yes"<br /><br />y levantamos el interfaz: /etc/sysconfig/network-devices/ifup eth1<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116535877511423959?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165358219684305322006-12-05T23:18:00.000+01:002006-12-19T13:46:49.193+01:00Ya tenemos el driver instalado y la wireless tools.<br /><br />Vamos a probar:<br />iwconfig<br />lo no wireless extensions.<br /><br />eth0 no wireless extensions.<br /><br />eth1 unassociated ESSID:off/any<br /> Mode:Managed Channel=0 Access Point: Not-Associated<br /> Bit Rate:0 kb/s Tx-Power=20 dBm Sensitivity=8/0<br /> Retry limit:7 RTS thr:off Fragment thr:off<br /> Encryption key:off<br /> Power Management:off<br /> Link Quality:0 Signal level:0 Noise level:0<br /> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br /> Tx excessive retries:0 Invalid misc:0 Missed beacon:0<br /><br />Ahora vamos ver qué redes tenemos a nuestro alcance: iwlist eth1 scanning<br /><br />Ponemos el id de nuestra red: iwconfig eth1 essid "TOLETUM"<br />El canal: iwconfig eth1 channel 11<br /><br /><br />iwconfig eth1 <br /><br />eth1 IEEE 802.11g ESSID:"TOLETUM"<br /> Mode:Managed Frequency:2.462 GHz Access Point: XX:XX:XX:XX:XX:XX<br /> Bit Rate:54 Mb/s Tx-Power=20 dBm Sensitivity=8/0<br /> Retry limit:7 RTS thr:off Fragment thr:off<br /> Encryption key:off<br /> Power Management:off<br /> Link Quality=97/100 Signal level=-27 dBm Noise level=-87 dBm<br /> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br /> Tx excessive retries:0 Invalid misc:0 Missed beacon:0<br /><br />Ya estamos conectados, ahora hay que configurar la eth1<br /><br />Primero y para evitar problema paramos la eth0: /etc/rc.d/init.d/network stop<br /><br />En /etc/sysconfig/network-devices/ifconfig.eth0/ipv4 ponemos ONBOOT=no y creamos el directorio /etc/sysconfig/network-devices/ifconfig.eth1 creamos el fichero ipv4:<br />ONBOOT=yes<br />SERVICE=ipv4-static<br />IP=192.168.1.20<br />GATEWAY=192.168.1.1<br />PREFIX=24<br />BROADCAST=255.255.255.0<br /><br />Yo normalmente no utilizo la eth0 y eth1 al mismo tiempo, es más una vez configurada la wifi no uso el cable, si fuese así en ONBOOT=no y con /etc/sysconfig/network-devices/ifup y /etc/sysconfig/network-devices/ipdown iria cambiando de interfaz<br /><br />Y arrancamos /etc/rc.d/init.d/network start.<br /><br />Con esto la eth0 no se va a levantar, pero si nuestra eth1 (wifi)<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116535821968430532?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165346676754245692006-12-05T20:22:00.000+01:002006-12-19T13:48:26.717+01:00Vamos hacer que linux reconozca la tarjeta wifi del portátil. La tarjeta es 0000:02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05). Este portátil se conoce como Intel Centrino.<br /><br />Vamos a las fuentes kernel: make menuconfig<br />Device Drivers -> Network device support<br />[*] Wireless LAN drivers (non-hamradio) & Wireless Extensions<br />&lt; &gt; Intel PRO/Wireless 2200BG and 2915ABG Network Connection<br /><br />OJO: Desactivado Intel PRO/Wireless 2200BG and 2915ABG Network Connection<br /><br />Device Drivers -> Generic Driver Options:<br />[*] Select only drivers that don't need compile-time external firmwar<br />[*] Prevent firmware from being built<br />&lt;m&gt; Userspace firmware loading support<br /><br />Networking:<br />[*] Networking support<br />&lt; &gt; Generic IEEE 802.11 Networking Stack<br /><br />OJO: Desactivado Generic IEEE 802.11 Networking Stack<br /><br />Cryptographic options:<br />[*] Cryptographic API<br />&lt;m&gt; AES cipher algorithms (i586)<br />&lt;m&gt; ARC4 cipher algorithm<br />&lt;m&gt; Michael MIC keyed digest algorithm<br /><br />Library routines:<br />&lt;m&gt; CRC32 functions<br /><br />Ahora nos descargamos los fuentes del driver y el firmware. Todo esto está en http://ipw2200.sourceforge.net/firmware.php y http://ipw2200.sourceforge.net/downloads.php.<br /><br />Todas las fuentes y firmware los dejo en /usr/src.<br /><br />Las instrucciones son para la versión 3.0 de firmware y 1.2.0 del driver.<br /><br />Para compilar el driver necesitamos ieee80211 subsystem for Linux, los fuentes están http://ieee80211.sourceforge.net/downloads.php. La versión que voy a utilizar es 1.2.15<br />tar xf ieee80211-1.2.15.tgz<br />cd ieee80211-1.2.15<br />make<br />make install<br /><br />Con esto instala en /lib/modules/2.6.18.3/net/ieee80211/ los módulos necesarios.<br />ieee80211_crypt_ccmp.ko ieee80211_crypt_tkip.ko ieee80211.ko<br />ieee80211_crypt.ko ieee80211_crypt_wep.ko<br /><br />Ahora el driver:<br /><br />tar xf ipw2200-1.2.0.tgz<br />cd ipw2200-1.2.0<br />make KSRC=/usr/src/linux<br /></m>make KSRC=/usr/src/linux install<br /><m><br />/usr/src/linux es dónde están los fuentes de linux<br /><br />Ya tenemos instalado en /lib/modules/2.6.18.3/kernel/drivers/net/wireless/ el módulo ipw2200.ko<br /><br />Por último instalamos el firmware:<br />tar xf ipw2200-fw-3.0.tgz<br />cd ipw2200-fw-3.0<br />cp -v *.fw /lib/firmware/<br /><br />Veamos si está todo bien:<br />modprobe firmware_class<br />modprobe crc32<br /><br />modprobe ieee80211<br />tail /var/log/kern.log<br /> ieee80211_crypt: registered algorithm 'NULL'<br /> ieee80211: 802.11 data/management/control stack, 1.2.15<br /> ieee80211: Copyright (C) 2004-2005 Intel Corporation jketreno@linux.intel.com<br />modprobe ieee80211_crypt_wep<br />tail /var/log/kern.log<br /> ieee80211_crypt: registered algorithm 'WEP'<br /><br />modprobe ipw2200<br />tail /var/log/kern.log<br />ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0dmq<br />ipw2200: Copyright(c) 2003-2006 Intel Corporation<br />PCI: Found IRQ 11 for device 0000:02:04.0<br />PCI: Sharing IRQ 11 with 0000:02:08.0<br />ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection<br />ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)<br /><br />No borro los directorios con las fuentes.<br /><br />Para que la tarjeta wifi sea eth1:<br />borramos /etc/udev/rules.d/75-persistent-net-generator.rules<br />y creamos/editamos /etc/udev/rules.d/70-persistent-net.rules con la siguiente linea: SUBSYSTEM=="net", SYSFS{address}=="DIRECCION_MAC", NAME="eth1"<br /><br />Para saber la DIRECCION_MAC: cat /sys/class/net/eth1/address o con ip addre campo link/ether<br /><br />Ok, todo tiene buena pinta. Ahora tenemos que instalar Wireless Tools.<br /><br />Para ello seguimos los pasos de <a href="http://www.linuxfromscratch.org/blfs/view/svn/basicnet/wireless_tools.html">BLFS</a>.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116534667675424569?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165346228941816152006-12-05T20:07:00.000+01:002006-12-19T13:48:55.301+01:00Sólo nos queda configurar un poco nuestro linux para que tenga mejor aspecto.<br /><br />Configuración general, para todos los usuarios:<br />/etc/profile:<br /># Begin /etc/profile<br /><br />export LANG=es_ES.utf8<br />export INPUTRC=/etc/inputrc<br /><br />export PATH=/bin:/usr/bin<br /><br />if [ $EUID -eq 0 ] ; then<br /> export PATH=$PATH:/sbin:/usr/sbin<br /> unset HISTFILE<br />fi<br /><br /># Setup some environment variables.<br />export HISTSIZE=1000<br />export HISTIGNORE="&:[bf]g:exit"<br />#export PS1="[\u@\h \w]\\$ "<br />export PS1='\u@\h:\w\$ '<br /><br /># End /etc/profile<br /><br />/etc/bashrc:<br />if [ -f "/etc/dircolors" ] ; then<br /> eval $(dircolors -b /etc/dircolors)<br /><br /> if [ -f "$HOME/.dircolors" ] ; then<br /> eval $(dircolors -b $HOME/.dircolors)<br /> fi<br />fi<br />alias ls='ls --color=auto'<br /><br /><br />Configuración para root:<br />/root/.bash_profile:<br />if [ -f "$HOME/.bashrc" ] ; then<br /> source $HOME/.bashrc<br />fi<br /><br />/root/.bashrc:<br />if [ -f "/etc/bashrc" ] ; then<br /> source /etc/bashrc<br />fi<br /><br />Por último:<br />dircolors -p > /etc/dircolors<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116534622894181615?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165525658100909532006-12-05T19:05:00.000+01:002006-12-19T13:49:19.569+01:00Con esta utilidad nos podremos bajar la paquetes que necesitemos.<br /><br />Nos bajamos los fuentes de http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz<br /><br />./configure --prefix=/usr/local/wget<br />make<br />make install<br /><br />Más tarde cuando instalemos openSSL volveremos a compilar para que prueba trabajo en entornos seguros.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116552565810090953?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165346797016328592006-12-04T20:24:00.000+01:002006-12-19T13:49:38.513+01:00#<br /># Automatically generated make config: don't edit<br /># Linux kernel version: 2.6.18.3<br /># Tue Dec 5 20:54:15 2006<br />#<br />CONFIG_X86_32=y<br />CONFIG_GENERIC_TIME=y<br />CONFIG_LOCKDEP_SUPPORT=y<br />CONFIG_STACKTRACE_SUPPORT=y<br />CONFIG_SEMAPHORE_SLEEPERS=y<br />CONFIG_X86=y<br />CONFIG_MMU=y<br />CONFIG_GENERIC_ISA_DMA=y<br />CONFIG_GENERIC_IOMAP=y<br />CONFIG_GENERIC_HWEIGHT=y<br />CONFIG_ARCH_MAY_HAVE_PC_FDC=y<br />CONFIG_DMI=y<br />CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"<br /><br />#<br /># Code maturity level options<br />#<br />CONFIG_EXPERIMENTAL=y<br />CONFIG_BROKEN_ON_SMP=y<br />CONFIG_LOCK_KERNEL=y<br />CONFIG_INIT_ENV_ARG_LIMIT=32<br /><br />#<br /># General setup<br />#<br />CONFIG_LOCALVERSION=""<br /># CONFIG_LOCALVERSION_AUTO is not set<br />CONFIG_SWAP=y<br />CONFIG_SYSVIPC=y<br /># CONFIG_POSIX_MQUEUE is not set<br /># CONFIG_BSD_PROCESS_ACCT is not set<br /># CONFIG_TASKSTATS is not set<br /># CONFIG_AUDIT is not set<br />CONFIG_IKCONFIG=y<br />CONFIG_IKCONFIG_PROC=y<br /># CONFIG_RELAY is not set<br />CONFIG_INITRAMFS_SOURCE=""<br />CONFIG_CC_OPTIMIZE_FOR_SIZE=y<br /># CONFIG_EMBEDDED is not set<br />CONFIG_UID16=y<br />CONFIG_SYSCTL=y<br />CONFIG_KALLSYMS=y<br /># CONFIG_KALLSYMS_EXTRA_PASS is not set<br />CONFIG_HOTPLUG=y<br />CONFIG_PRINTK=y<br />CONFIG_BUG=y<br />CONFIG_ELF_CORE=y<br />CONFIG_BASE_FULL=y<br />CONFIG_FUTEX=y<br />CONFIG_EPOLL=y<br />CONFIG_SHMEM=y<br />CONFIG_SLAB=y<br />CONFIG_VM_EVENT_COUNTERS=y<br />CONFIG_RT_MUTEXES=y<br /># CONFIG_TINY_SHMEM is not set<br />CONFIG_BASE_SMALL=0<br /># CONFIG_SLOB is not set<br /><br />#<br /># Loadable module support<br />#<br />CONFIG_MODULES=y<br />CONFIG_MODULE_UNLOAD=y<br />CONFIG_MODULE_FORCE_UNLOAD=y<br /># CONFIG_MODVERSIONS is not set<br /># CONFIG_MODULE_SRCVERSION_ALL is not set<br />CONFIG_KMOD=y<br /><br />#<br /># Block layer<br />#<br /># CONFIG_LBD is not set<br /># CONFIG_BLK_DEV_IO_TRACE is not set<br /># CONFIG_LSF is not set<br /><br />#<br /># IO Schedulers<br />#<br />CONFIG_IOSCHED_NOOP=y<br /># CONFIG_IOSCHED_AS is not set<br /># CONFIG_IOSCHED_DEADLINE is not set<br />CONFIG_IOSCHED_CFQ=y<br /># CONFIG_DEFAULT_AS is not set<br /># CONFIG_DEFAULT_DEADLINE is not set<br />CONFIG_DEFAULT_CFQ=y<br /># CONFIG_DEFAULT_NOOP is not set<br />CONFIG_DEFAULT_IOSCHED="cfq"<br /><br />#<br /># Processor type and features<br />#<br /># CONFIG_SMP is not set<br />CONFIG_X86_PC=y<br /># CONFIG_X86_ELAN is not set<br /># CONFIG_X86_VOYAGER is not set<br /># CONFIG_X86_NUMAQ is not set<br /># CONFIG_X86_SUMMIT is not set<br /># CONFIG_X86_BIGSMP is not set<br /># CONFIG_X86_VISWS is not set<br /># CONFIG_X86_GENERICARCH is not set<br /># CONFIG_X86_ES7000 is not set<br /># CONFIG_M386 is not set<br /># CONFIG_M486 is not set<br /># CONFIG_M586 is not set<br /># CONFIG_M586TSC is not set<br /># CONFIG_M586MMX is not set<br /># CONFIG_M686 is not set<br /># CONFIG_MPENTIUMII is not set<br /># CONFIG_MPENTIUMIII is not set<br /># CONFIG_MPENTIUMM is not set<br />CONFIG_MPENTIUM4=y<br /># CONFIG_MK6 is not set<br /># CONFIG_MK7 is not set<br /># CONFIG_MK8 is not set<br /># CONFIG_MCRUSOE is not set<br /># CONFIG_MEFFICEON is not set<br /># CONFIG_MWINCHIPC6 is not set<br /># CONFIG_MWINCHIP2 is not set<br /># CONFIG_MWINCHIP3D is not set<br /># CONFIG_MGEODEGX1 is not set<br /># CONFIG_MGEODE_LX is not set<br /># CONFIG_MCYRIXIII is not set<br /># CONFIG_MVIAC3_2 is not set<br /># CONFIG_X86_GENERIC is not set<br />CONFIG_X86_CMPXCHG=y<br />CONFIG_X86_XADD=y<br />CONFIG_X86_L1_CACHE_SHIFT=7<br />CONFIG_RWSEM_XCHGADD_ALGORITHM=y<br />CONFIG_GENERIC_CALIBRATE_DELAY=y<br />CONFIG_X86_WP_WORKS_OK=y<br />CONFIG_X86_INVLPG=y<br />CONFIG_X86_BSWAP=y<br />CONFIG_X86_POPAD_OK=y<br />CONFIG_X86_CMPXCHG64=y<br />CONFIG_X86_GOOD_APIC=y<br />CONFIG_X86_INTEL_USERCOPY=y<br />CONFIG_X86_USE_PPRO_CHECKSUM=y<br />CONFIG_X86_TSC=y<br /># CONFIG_HPET_TIMER is not set<br /># CONFIG_PREEMPT_NONE is not set<br /># CONFIG_PREEMPT_VOLUNTARY is not set<br />CONFIG_PREEMPT=y<br />CONFIG_PREEMPT_BKL=y<br />CONFIG_X86_UP_APIC=y<br />CONFIG_X86_UP_IOAPIC=y<br />CONFIG_X86_LOCAL_APIC=y<br />CONFIG_X86_IO_APIC=y<br />CONFIG_X86_MCE=y<br />CONFIG_X86_MCE_NONFATAL=y<br /># CONFIG_X86_MCE_P4THERMAL is not set<br />CONFIG_VM86=y<br /># CONFIG_TOSHIBA is not set<br /># CONFIG_I8K is not set<br /># CONFIG_X86_REBOOTFIXUPS is not set<br /># CONFIG_MICROCODE is not set<br /># CONFIG_X86_MSR is not set<br /># CONFIG_X86_CPUID is not set<br /><br />#<br /># Firmware Drivers<br />#<br /># CONFIG_EDD is not set<br /># CONFIG_DELL_RBU is not set<br /># CONFIG_DCDBAS is not set<br />CONFIG_NOHIGHMEM=y<br /># CONFIG_HIGHMEM4G is not set<br /># CONFIG_HIGHMEM64G is not set<br />CONFIG_PAGE_OFFSET=0xC0000000<br />CONFIG_ARCH_FLATMEM_ENABLE=y<br />CONFIG_ARCH_SPARSEMEM_ENABLE=y<br />CONFIG_ARCH_SELECT_MEMORY_MODEL=y<br />CONFIG_SELECT_MEMORY_MODEL=y<br />CONFIG_FLATMEM_MANUAL=y<br /># CONFIG_DISCONTIGMEM_MANUAL is not set<br /># CONFIG_SPARSEMEM_MANUAL is not set<br />CONFIG_FLATMEM=y<br />CONFIG_FLAT_NODE_MEM_MAP=y<br />CONFIG_SPARSEMEM_STATIC=y<br />CONFIG_SPLIT_PTLOCK_CPUS=4<br /># CONFIG_RESOURCES_64BIT is not set<br /># CONFIG_MATH_EMULATION is not set<br />CONFIG_MTRR=y<br />CONFIG_REGPARM=y<br /># CONFIG_SECCOMP is not set<br />CONFIG_HZ_100=y<br /># CONFIG_HZ_250 is not set<br /># CONFIG_HZ_1000 is not set<br />CONFIG_HZ=100<br /># CONFIG_KEXEC is not set<br />CONFIG_PHYSICAL_START=0x100000<br /># CONFIG_COMPAT_VDSO is not set<br /><br />#<br /># Power management options (ACPI, APM)<br />#<br />CONFIG_PM=y<br /># CONFIG_PM_LEGACY is not set<br /># CONFIG_PM_DEBUG is not set<br />CONFIG_SOFTWARE_SUSPEND=y<br />CONFIG_PM_STD_PARTITION=""<br /><br />#<br /># ACPI (Advanced Configuration and Power Interface) Support<br />#<br /># CONFIG_ACPI is not set<br /><br />#<br /># APM (Advanced Power Management) BIOS Support<br />#<br />CONFIG_APM=y<br /># CONFIG_APM_IGNORE_USER_SUSPEND is not set<br /># CONFIG_APM_DO_ENABLE is not set<br /># CONFIG_APM_CPU_IDLE is not set<br /># CONFIG_APM_DISPLAY_BLANK is not set<br /># CONFIG_APM_RTC_IS_GMT is not set<br /># CONFIG_APM_ALLOW_INTS is not set<br />CONFIG_APM_REAL_MODE_POWER_OFF=y<br /><br />#<br /># CPU Frequency scaling<br />#<br /># CONFIG_CPU_FREQ is not set<br /><br />#<br /># Bus options (PCI, PCMCIA, EISA, MCA, ISA)<br />#<br />CONFIG_PCI=y<br /># CONFIG_PCI_GOBIOS is not set<br /># CONFIG_PCI_GOMMCONFIG is not set<br /># CONFIG_PCI_GODIRECT is not set<br />CONFIG_PCI_GOANY=y<br />CONFIG_PCI_BIOS=y<br />CONFIG_PCI_DIRECT=y<br /># CONFIG_PCIEPORTBUS is not set<br /># CONFIG_PCI_MSI is not set<br />CONFIG_ISA_DMA_API=y<br /># CONFIG_ISA is not set<br /># CONFIG_MCA is not set<br /># CONFIG_SCx200 is not set<br /><br />#<br /># PCCARD (PCMCIA/CardBus) support<br />#<br /># CONFIG_PCCARD is not set<br /><br />#<br /># PCI Hotplug Support<br />#<br />CONFIG_HOTPLUG_PCI=y<br /># CONFIG_HOTPLUG_PCI_FAKE is not set<br /># CONFIG_HOTPLUG_PCI_COMPAQ is not set<br /># CONFIG_HOTPLUG_PCI_IBM is not set<br /># CONFIG_HOTPLUG_PCI_CPCI is not set<br /># CONFIG_HOTPLUG_PCI_SHPC is not set<br /><br />#<br /># Executable file formats<br />#<br />CONFIG_BINFMT_ELF=y<br /># CONFIG_BINFMT_AOUT is not set<br /># CONFIG_BINFMT_MISC is not set<br /><br />#<br /># Networking<br />#<br />CONFIG_NET=y<br /><br />#<br /># Networking options<br />#<br /># CONFIG_NETDEBUG is not set<br />CONFIG_PACKET=y<br />CONFIG_PACKET_MMAP=y<br />CONFIG_UNIX=y<br />CONFIG_XFRM=y<br /># CONFIG_XFRM_USER is not set<br /># CONFIG_NET_KEY is not set<br />CONFIG_INET=y<br /># CONFIG_IP_MULTICAST is not set<br /># CONFIG_IP_ADVANCED_ROUTER is not set<br />CONFIG_IP_FIB_HASH=y<br /># CONFIG_IP_PNP is not set<br /># CONFIG_NET_IPIP is not set<br /># CONFIG_NET_IPGRE is not set<br /># CONFIG_ARPD is not set<br /># CONFIG_SYN_COOKIES is not set<br /># CONFIG_INET_AH is not set<br /># CONFIG_INET_ESP is not set<br /># CONFIG_INET_IPCOMP is not set<br /># CONFIG_INET_XFRM_TUNNEL is not set<br /># CONFIG_INET_TUNNEL is not set<br />CONFIG_INET_XFRM_MODE_TRANSPORT=y<br />CONFIG_INET_XFRM_MODE_TUNNEL=y<br /># CONFIG_INET_DIAG is not set<br /># CONFIG_TCP_CONG_ADVANCED is not set<br />CONFIG_TCP_CONG_BIC=y<br /><br />#<br /># IP: Virtual Server Configuration<br />#<br /># CONFIG_IP_VS is not set<br /># CONFIG_IPV6 is not set<br /># CONFIG_INET6_XFRM_TUNNEL is not set<br /># CONFIG_INET6_TUNNEL is not set<br /># CONFIG_NETWORK_SECMARK is not set<br />CONFIG_NETFILTER=y<br /># CONFIG_NETFILTER_DEBUG is not set<br /><br />#<br /># Core Netfilter Configuration<br />#<br /># CONFIG_NETFILTER_NETLINK is not set<br />CONFIG_NETFILTER_XTABLES=y<br /># CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set<br /># CONFIG_NETFILTER_XT_TARGET_MARK is not set<br /># CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set<br /># CONFIG_NETFILTER_XT_MATCH_COMMENT is not set<br /># CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set<br /># CONFIG_NETFILTER_XT_MATCH_DCCP is not set<br /># CONFIG_NETFILTER_XT_MATCH_ESP is not set<br /># CONFIG_NETFILTER_XT_MATCH_HELPER is not set<br /># CONFIG_NETFILTER_XT_MATCH_LENGTH is not set<br />CONFIG_NETFILTER_XT_MATCH_LIMIT=y<br />CONFIG_NETFILTER_XT_MATCH_MAC=y<br /># CONFIG_NETFILTER_XT_MATCH_MARK is not set<br /># CONFIG_NETFILTER_XT_MATCH_POLICY is not set<br /># CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set<br /># CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set<br /># CONFIG_NETFILTER_XT_MATCH_QUOTA is not set<br /># CONFIG_NETFILTER_XT_MATCH_REALM is not set<br /># CONFIG_NETFILTER_XT_MATCH_SCTP is not set<br />CONFIG_NETFILTER_XT_MATCH_STATE=y<br /># CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set<br /># CONFIG_NETFILTER_XT_MATCH_STRING is not set<br /># CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set<br /><br />#<br /># IP: Netfilter Configuration<br />#<br />CONFIG_IP_NF_CONNTRACK=y<br /># CONFIG_IP_NF_CT_ACCT is not set<br /># CONFIG_IP_NF_CONNTRACK_MARK is not set<br /># CONFIG_IP_NF_CONNTRACK_EVENTS is not set<br /># CONFIG_IP_NF_CT_PROTO_SCTP is not set<br />CONFIG_IP_NF_FTP=y<br /># CONFIG_IP_NF_IRC is not set<br /># CONFIG_IP_NF_NETBIOS_NS is not set<br /># CONFIG_IP_NF_TFTP is not set<br /># CONFIG_IP_NF_AMANDA is not set<br /># CONFIG_IP_NF_PPTP is not set<br /># CONFIG_IP_NF_H323 is not set<br /># CONFIG_IP_NF_SIP is not set<br /># CONFIG_IP_NF_QUEUE is not set<br />CONFIG_IP_NF_IPTABLES=y<br /># CONFIG_IP_NF_MATCH_IPRANGE is not set<br /># CONFIG_IP_NF_MATCH_TOS is not set<br /># CONFIG_IP_NF_MATCH_RECENT is not set<br /># CONFIG_IP_NF_MATCH_ECN is not set<br /># CONFIG_IP_NF_MATCH_DSCP is not set<br /># CONFIG_IP_NF_MATCH_AH is not set<br /># CONFIG_IP_NF_MATCH_TTL is not set<br /># CONFIG_IP_NF_MATCH_OWNER is not set<br /># CONFIG_IP_NF_MATCH_ADDRTYPE is not set<br /># CONFIG_IP_NF_MATCH_HASHLIMIT is not set<br />CONFIG_IP_NF_FILTER=y<br /># CONFIG_IP_NF_TARGET_REJECT is not set<br />CONFIG_IP_NF_TARGET_LOG=y<br /># CONFIG_IP_NF_TARGET_ULOG is not set<br /># CONFIG_IP_NF_TARGET_TCPMSS is not set<br /># CONFIG_IP_NF_NAT is not set<br /># CONFIG_IP_NF_MANGLE is not set<br /># CONFIG_IP_NF_RAW is not set<br /># CONFIG_IP_NF_ARPTABLES is not set<br /><br />#<br /># DCCP Configuration (EXPERIMENTAL)<br />#<br /># CONFIG_IP_DCCP is not set<br /><br />#<br /># SCTP Configuration (EXPERIMENTAL)<br />#<br /># CONFIG_IP_SCTP is not set<br /><br />#<br /># TIPC Configuration (EXPERIMENTAL)<br />#<br /># CONFIG_TIPC is not set<br /># CONFIG_ATM is not set<br /># CONFIG_BRIDGE is not set<br /># CONFIG_VLAN_8021Q is not set<br /># CONFIG_DECNET is not set<br /># CONFIG_LLC2 is not set<br /># CONFIG_IPX is not set<br /># CONFIG_ATALK is not set<br /># CONFIG_X25 is not set<br /># CONFIG_LAPB is not set<br /># CONFIG_ECONET is not set<br /># CONFIG_WAN_ROUTER is not set<br /><br />#<br /># QoS and/or fair queueing<br />#<br /># CONFIG_NET_SCHED is not set<br /><br />#<br /># Network testing<br />#<br /># CONFIG_NET_PKTGEN is not set<br /># CONFIG_HAMRADIO is not set<br /># CONFIG_IRDA is not set<br /># CONFIG_BT is not set<br /># CONFIG_IEEE80211 is not set<br />CONFIG_WIRELESS_EXT=y<br /><br />#<br /># Device Drivers<br />#<br /><br />#<br /># Generic Driver Options<br />#<br />CONFIG_STANDALONE=y<br />CONFIG_PREVENT_FIRMWARE_BUILD=y<br /># CONFIG_FW_LOADER is not set<br /># CONFIG_SYS_HYPERVISOR is not set<br /><br />#<br /># Connector - unified userspace <-> kernelspace linker<br />#<br /># CONFIG_CONNECTOR is not set<br /><br />#<br /># Memory Technology Devices (MTD)<br />#<br /># CONFIG_MTD is not set<br /><br />#<br /># Parallel port support<br />#<br /># CONFIG_PARPORT is not set<br /><br />#<br /># Plug and Play support<br />#<br /><br />#<br /># Block devices<br />#<br /># CONFIG_BLK_DEV_FD is not set<br /># CONFIG_BLK_CPQ_DA is not set<br /># CONFIG_BLK_CPQ_CISS_DA is not set<br /># CONFIG_BLK_DEV_DAC960 is not set<br /># CONFIG_BLK_DEV_UMEM is not set<br /># CONFIG_BLK_DEV_COW_COMMON is not set<br />CONFIG_BLK_DEV_LOOP=y<br /># CONFIG_BLK_DEV_CRYPTOLOOP is not set<br /># CONFIG_BLK_DEV_NBD is not set<br /># CONFIG_BLK_DEV_SX8 is not set<br /># CONFIG_BLK_DEV_RAM is not set<br /># CONFIG_BLK_DEV_INITRD is not set<br /># CONFIG_CDROM_PKTCDVD is not set<br /># CONFIG_ATA_OVER_ETH is not set<br /><br />#<br /># ATA/ATAPI/MFM/RLL support<br />#<br />CONFIG_IDE=y<br />CONFIG_BLK_DEV_IDE=y<br /><br />#<br /># Please see Documentation/ide.txt for help/info on IDE drives<br />#<br /># CONFIG_BLK_DEV_IDE_SATA is not set<br /># CONFIG_BLK_DEV_HD_IDE is not set<br />CONFIG_BLK_DEV_IDEDISK=y<br /># CONFIG_IDEDISK_MULTI_MODE is not set<br />CONFIG_BLK_DEV_IDECD=y<br /># CONFIG_BLK_DEV_IDETAPE is not set<br /># CONFIG_BLK_DEV_IDEFLOPPY is not set<br /># CONFIG_IDE_TASK_IOCTL is not set<br /><br />#<br /># IDE chipset support/bugfixes<br />#<br /># CONFIG_IDE_GENERIC is not set<br /># CONFIG_BLK_DEV_CMD640 is not set<br />CONFIG_BLK_DEV_IDEPCI=y<br />CONFIG_IDEPCI_SHARE_IRQ=y<br /># CONFIG_BLK_DEV_OFFBOARD is not set<br /># CONFIG_BLK_DEV_GENERIC is not set<br /># CONFIG_BLK_DEV_OPTI621 is not set<br /># CONFIG_BLK_DEV_RZ1000 is not set<br />CONFIG_BLK_DEV_IDEDMA_PCI=y<br /># CONFIG_BLK_DEV_IDEDMA_FORCED is not set<br />CONFIG_IDEDMA_PCI_AUTO=y<br /># CONFIG_IDEDMA_ONLYDISK is not set<br /># CONFIG_BLK_DEV_AEC62XX is not set<br /># CONFIG_BLK_DEV_ALI15X3 is not set<br /># CONFIG_BLK_DEV_AMD74XX is not set<br /># CONFIG_BLK_DEV_ATIIXP is not set<br /># CONFIG_BLK_DEV_CMD64X is not set<br /># CONFIG_BLK_DEV_TRIFLEX is not set<br /># CONFIG_BLK_DEV_CY82C693 is not set<br /># CONFIG_BLK_DEV_CS5520 is not set<br /># CONFIG_BLK_DEV_CS5530 is not set<br /># CONFIG_BLK_DEV_CS5535 is not set<br /># CONFIG_BLK_DEV_HPT34X is not set<br /># CONFIG_BLK_DEV_HPT366 is not set<br /># CONFIG_BLK_DEV_SC1200 is not set<br />CONFIG_BLK_DEV_PIIX=y<br />CONFIG_BLK_DEV_IT821X=y<br /># CONFIG_BLK_DEV_NS87415 is not set<br /># CONFIG_BLK_DEV_PDC202XX_OLD is not set<br /># CONFIG_BLK_DEV_PDC202XX_NEW is not set<br /># CONFIG_BLK_DEV_SVWKS is not set<br /># CONFIG_BLK_DEV_SIIMAGE is not set<br /># CONFIG_BLK_DEV_SIS5513 is not set<br /># CONFIG_BLK_DEV_SLC90E66 is not set<br /># CONFIG_BLK_DEV_TRM290 is not set<br /># CONFIG_BLK_DEV_VIA82CXXX is not set<br /># CONFIG_IDE_ARM is not set<br />CONFIG_BLK_DEV_IDEDMA=y<br /># CONFIG_IDEDMA_IVB is not set<br />CONFIG_IDEDMA_AUTO=y<br /># CONFIG_BLK_DEV_HD is not set<br /><br />#<br /># SCSI device support<br />#<br /># CONFIG_RAID_ATTRS is not set<br /># CONFIG_SCSI is not set<br /><br />#<br /># Multi-device support (RAID and LVM)<br />#<br /># CONFIG_MD is not set<br /><br />#<br /># Fusion MPT device support<br />#<br /># CONFIG_FUSION is not set<br /><br />#<br /># IEEE 1394 (FireWire) support<br />#<br /># CONFIG_IEEE1394 is not set<br /><br />#<br /># I2O device support<br />#<br /># CONFIG_I2O is not set<br /><br />#<br /># Network device support<br />#<br />CONFIG_NETDEVICES=y<br /># CONFIG_DUMMY is not set<br /># CONFIG_BONDING is not set<br /># CONFIG_EQUALIZER is not set<br /># CONFIG_TUN is not set<br /><br />#<br /># ARCnet devices<br />#<br /># CONFIG_ARCNET is not set<br /><br />#<br /># PHY device support<br />#<br /># CONFIG_PHYLIB is not set<br /><br />#<br /># Ethernet (10 or 100Mbit)<br />#<br />CONFIG_NET_ETHERNET=y<br />CONFIG_MII=m<br /># CONFIG_HAPPYMEAL is not set<br /># CONFIG_SUNGEM is not set<br /># CONFIG_CASSINI is not set<br /># CONFIG_NET_VENDOR_3COM is not set<br /><br />#<br /># Tulip family network device support<br />#<br /># CONFIG_NET_TULIP is not set<br /># CONFIG_HP100 is not set<br />CONFIG_NET_PCI=y<br /># CONFIG_PCNET32 is not set<br /># CONFIG_AMD8111_ETH is not set<br /># CONFIG_ADAPTEC_STARFIRE is not set<br /># CONFIG_B44 is not set<br /># CONFIG_FORCEDETH is not set<br /># CONFIG_DGRS is not set<br /># CONFIG_EEPRO100 is not set<br />CONFIG_E100=m<br /># CONFIG_FEALNX is not set<br /># CONFIG_NATSEMI is not set<br /># CONFIG_NE2K_PCI is not set<br /># CONFIG_8139CP is not set<br /># CONFIG_8139TOO is not set<br /># CONFIG_SIS900 is not set<br /># CONFIG_EPIC100 is not set<br /># CONFIG_SUNDANCE is not set<br /># CONFIG_TLAN is not set<br /># CONFIG_VIA_RHINE is not set<br /><br />#<br /># Ethernet (1000 Mbit)<br />#<br /># CONFIG_ACENIC is not set<br /># CONFIG_DL2K is not set<br /># CONFIG_E1000 is not set<br /># CONFIG_NS83820 is not set<br /># CONFIG_HAMACHI is not set<br /># CONFIG_YELLOWFIN is not set<br /># CONFIG_R8169 is not set<br /># CONFIG_SIS190 is not set<br /># CONFIG_SKGE is not set<br /># CONFIG_SKY2 is not set<br /># CONFIG_SK98LIN is not set<br /># CONFIG_VIA_VELOCITY is not set<br /># CONFIG_TIGON3 is not set<br /># CONFIG_BNX2 is not set<br /><br />#<br /># Ethernet (10000 Mbit)<br />#<br /># CONFIG_CHELSIO_T1 is not set<br /># CONFIG_IXGB is not set<br /># CONFIG_S2IO is not set<br /># CONFIG_MYRI10GE is not set<br /><br />#<br /># Token Ring devices<br />#<br /># CONFIG_TR is not set<br /><br />#<br /># Wireless LAN (non-hamradio)<br />#<br />CONFIG_NET_RADIO=y<br /># CONFIG_NET_WIRELESS_RTNETLINK is not set<br /><br />#<br /># Obsolete Wireless cards support (pre-802.11)<br />#<br /># CONFIG_STRIP is not set<br /><br />#<br /># Wireless 802.11b ISA/PCI cards support<br />#<br /># CONFIG_IPW2100 is not set<br /># CONFIG_IPW2200 is not set<br /># CONFIG_AIRO is not set<br /># CONFIG_HERMES is not set<br /># CONFIG_ATMEL is not set<br /><br />#<br /># Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support<br />#<br /># CONFIG_PRISM54 is not set<br /># CONFIG_HOSTAP is not set<br />CONFIG_NET_WIRELESS=y<br /><br />#<br /># Wan interfaces<br />#<br /># CONFIG_WAN is not set<br /># CONFIG_FDDI is not set<br /># CONFIG_HIPPI is not set<br /># CONFIG_PPP is not set<br /># CONFIG_SLIP is not set<br /># CONFIG_SHAPER is not set<br /># CONFIG_NETCONSOLE is not set<br /># CONFIG_NETPOLL is not set<br /># CONFIG_NET_POLL_CONTROLLER is not set<br /><br />#<br /># ISDN subsystem<br />#<br /># CONFIG_ISDN is not set<br /><br />#<br /># Telephony Support<br />#<br /># CONFIG_PHONE is not set<br /><br />#<br /># Input device support<br />#<br />CONFIG_INPUT=y<br /><br />#<br /># Userland interfaces<br />#<br />CONFIG_INPUT_MOUSEDEV=y<br />CONFIG_INPUT_MOUSEDEV_PSAUX=y<br />CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280<br />CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024<br /># CONFIG_INPUT_JOYDEV is not set<br /># CONFIG_INPUT_TSDEV is not set<br />CONFIG_INPUT_EVDEV=y<br /># CONFIG_INPUT_EVBUG is not set<br /><br />#<br /># Input Device Drivers<br />#<br />CONFIG_INPUT_KEYBOARD=y<br />CONFIG_KEYBOARD_ATKBD=y<br /># CONFIG_KEYBOARD_SUNKBD is not set<br /># CONFIG_KEYBOARD_LKKBD is not set<br /># CONFIG_KEYBOARD_XTKBD is not set<br /># CONFIG_KEYBOARD_NEWTON is not set<br />CONFIG_INPUT_MOUSE=y<br />CONFIG_MOUSE_PS2=y<br /># CONFIG_MOUSE_SERIAL is not set<br /># CONFIG_MOUSE_VSXXXAA is not set<br /># CONFIG_INPUT_JOYSTICK is not set<br /># CONFIG_INPUT_TOUCHSCREEN is not set<br /># CONFIG_INPUT_MISC is not set<br /><br />#<br /># Hardware I/O ports<br />#<br />CONFIG_SERIO=y<br />CONFIG_SERIO_I8042=y<br /># CONFIG_SERIO_SERPORT is not set<br /># CONFIG_SERIO_CT82C710 is not set<br /># CONFIG_SERIO_PCIPS2 is not set<br />CONFIG_SERIO_LIBPS2=y<br /># CONFIG_SERIO_RAW is not set<br /># CONFIG_GAMEPORT is not set<br /><br />#<br /># Character devices<br />#<br />CONFIG_VT=y<br />CONFIG_VT_CONSOLE=y<br />CONFIG_HW_CONSOLE=y<br /># CONFIG_VT_HW_CONSOLE_BINDING is not set<br /># CONFIG_SERIAL_NONSTANDARD is not set<br /><br />#<br /># Serial drivers<br />#<br />CONFIG_SERIAL_8250=y<br /># CONFIG_SERIAL_8250_CONSOLE is not set<br />CONFIG_SERIAL_8250_PCI=y<br />CONFIG_SERIAL_8250_NR_UARTS=4<br />CONFIG_SERIAL_8250_RUNTIME_UARTS=4<br /># CONFIG_SERIAL_8250_EXTENDED is not set<br /><br />#<br /># Non-8250 serial port support<br />#<br />CONFIG_SERIAL_CORE=y<br /># CONFIG_SERIAL_JSM is not set<br />CONFIG_UNIX98_PTYS=y<br />CONFIG_LEGACY_PTYS=y<br />CONFIG_LEGACY_PTY_COUNT=256<br /><br />#<br /># IPMI<br />#<br /># CONFIG_IPMI_HANDLER is not set<br /><br />#<br /># Watchdog Cards<br />#<br /># CONFIG_WATCHDOG is not set<br /># CONFIG_HW_RANDOM is not set<br />CONFIG_NVRAM=y<br />CONFIG_RTC=y<br /># CONFIG_DTLK is not set<br /># CONFIG_R3964 is not set<br /># CONFIG_APPLICOM is not set<br /># CONFIG_SONYPI is not set<br /><br />#<br /># Ftape, the floppy tape device driver<br />#<br /># CONFIG_FTAPE is not set<br />CONFIG_AGP=y<br /># CONFIG_AGP_ALI is not set<br /># CONFIG_AGP_ATI is not set<br /># CONFIG_AGP_AMD is not set<br /># CONFIG_AGP_AMD64 is not set<br /># CONFIG_AGP_INTEL is not set<br /># CONFIG_AGP_NVIDIA is not set<br /># CONFIG_AGP_SIS is not set<br /># CONFIG_AGP_SWORKS is not set<br /># CONFIG_AGP_VIA is not set<br /># CONFIG_AGP_EFFICEON is not set<br /># CONFIG_DRM is not set<br /># CONFIG_MWAVE is not set<br /># CONFIG_PC8736x_GPIO is not set<br /># CONFIG_NSC_GPIO is not set<br /># CONFIG_CS5535_GPIO is not set<br /># CONFIG_RAW_DRIVER is not set<br /># CONFIG_HANGCHECK_TIMER is not set<br /><br />#<br /># TPM devices<br />#<br /># CONFIG_TCG_TPM is not set<br /># CONFIG_TELCLOCK is not set<br /><br />#<br /># I2C support<br />#<br /># CONFIG_I2C is not set<br /><br />#<br /># SPI support<br />#<br /># CONFIG_SPI is not set<br /># CONFIG_SPI_MASTER is not set<br /><br />#<br /># Dallas's 1-wire bus<br />#<br /><br />#<br /># Hardware Monitoring support<br />#<br /># CONFIG_HWMON is not set<br /># CONFIG_HWMON_VID is not set<br /><br />#<br /># Misc devices<br />#<br /># CONFIG_IBM_ASM is not set<br /><br />#<br /># Multimedia devices<br />#<br /># CONFIG_VIDEO_DEV is not set<br />CONFIG_VIDEO_V4L2=y<br /><br />#<br /># Digital Video Broadcasting Devices<br />#<br /># CONFIG_DVB is not set<br /><br />#<br /># Graphics support<br />#<br /># CONFIG_FIRMWARE_EDID is not set<br /># CONFIG_FB is not set<br /><br />#<br /># Console display driver support<br />#<br />CONFIG_VGA_CONSOLE=y<br /># CONFIG_VGACON_SOFT_SCROLLBACK is not set<br />CONFIG_VIDEO_SELECT=y<br />CONFIG_DUMMY_CONSOLE=y<br /># CONFIG_BACKLIGHT_LCD_SUPPORT is not set<br /><br />#<br /># Sound<br />#<br /># CONFIG_SOUND is not set<br /><br />#<br /># USB support<br />#<br />CONFIG_USB_ARCH_HAS_HCD=y<br />CONFIG_USB_ARCH_HAS_OHCI=y<br />CONFIG_USB_ARCH_HAS_EHCI=y<br /># CONFIG_USB is not set<br /><br />#<br /># NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'<br />#<br /><br />#<br /># USB Gadget Support<br />#<br /># CONFIG_USB_GADGET is not set<br /><br />#<br /># MMC/SD Card support<br />#<br /># CONFIG_MMC is not set<br /><br />#<br /># LED devices<br />#<br /># CONFIG_NEW_LEDS is not set<br /><br />#<br /># LED drivers<br />#<br /><br />#<br /># LED Triggers<br />#<br /><br />#<br /># InfiniBand support<br />#<br /># CONFIG_INFINIBAND is not set<br /><br />#<br /># EDAC - error detection and reporting (RAS) (EXPERIMENTAL)<br />#<br /># CONFIG_EDAC is not set<br /><br />#<br /># Real Time Clock<br />#<br />CONFIG_RTC_LIB=m<br />CONFIG_RTC_CLASS=m<br /><br />#<br /># RTC interfaces<br />#<br />CONFIG_RTC_INTF_SYSFS=m<br />CONFIG_RTC_INTF_PROC=m<br />CONFIG_RTC_INTF_DEV=m<br /># CONFIG_RTC_INTF_DEV_UIE_EMUL is not set<br /><br />#<br /># RTC drivers<br />#<br /># CONFIG_RTC_DRV_DS1553 is not set<br /># CONFIG_RTC_DRV_DS1742 is not set<br /># CONFIG_RTC_DRV_M48T86 is not set<br /># CONFIG_RTC_DRV_TEST is not set<br /># CONFIG_RTC_DRV_V3020 is not set<br /><br />#<br /># DMA Engine support<br />#<br /># CONFIG_DMA_ENGINE is not set<br /><br />#<br /># DMA Clients<br />#<br /><br />#<br /># DMA Devices<br />#<br /><br />#<br /># File systems<br />#<br /># CONFIG_EXT2_FS is not set<br /># CONFIG_EXT3_FS is not set<br />CONFIG_REISERFS_FS=y<br /># CONFIG_REISERFS_CHECK is not set<br /># CONFIG_REISERFS_PROC_INFO is not set<br /># CONFIG_REISERFS_FS_XATTR is not set<br />CONFIG_JFS_FS=m<br /># CONFIG_JFS_POSIX_ACL is not set<br /># CONFIG_JFS_SECURITY is not set<br /># CONFIG_JFS_DEBUG is not set<br /># CONFIG_JFS_STATISTICS is not set<br /># CONFIG_FS_POSIX_ACL is not set<br /># CONFIG_XFS_FS is not set<br /># CONFIG_OCFS2_FS is not set<br /># CONFIG_MINIX_FS is not set<br /># CONFIG_ROMFS_FS is not set<br /># CONFIG_INOTIFY is not set<br /># CONFIG_QUOTA is not set<br />CONFIG_DNOTIFY=y<br /># CONFIG_AUTOFS_FS is not set<br /># CONFIG_AUTOFS4_FS is not set<br /># CONFIG_FUSE_FS is not set<br /><br />#<br /># CD-ROM/DVD Filesystems<br />#<br />CONFIG_ISO9660_FS=m<br />CONFIG_JOLIET=y<br />CONFIG_ZISOFS=y<br />CONFIG_ZISOFS_FS=m<br />CONFIG_UDF_FS=m<br />CONFIG_UDF_NLS=y<br /><br />#<br /># DOS/FAT/NT Filesystems<br />#<br />CONFIG_FAT_FS=m<br />CONFIG_MSDOS_FS=m<br />CONFIG_VFAT_FS=m<br />CONFIG_FAT_DEFAULT_CODEPAGE=850<br />CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"<br />CONFIG_NTFS_FS=m<br /># CONFIG_NTFS_DEBUG is not set<br /># CONFIG_NTFS_RW is not set<br /><br />#<br /># Pseudo filesystems<br />#<br />CONFIG_PROC_FS=y<br />CONFIG_PROC_KCORE=y<br />CONFIG_SYSFS=y<br />CONFIG_TMPFS=y<br /># CONFIG_HUGETLBFS is not set<br /># CONFIG_HUGETLB_PAGE is not set<br />CONFIG_RAMFS=y<br /># CONFIG_CONFIGFS_FS is not set<br /><br />#<br /># Miscellaneous filesystems<br />#<br /># CONFIG_ADFS_FS is not set<br /># CONFIG_AFFS_FS is not set<br /># CONFIG_HFS_FS is not set<br /># CONFIG_HFSPLUS_FS is not set<br /># CONFIG_BEFS_FS is not set<br /># CONFIG_BFS_FS is not set<br /># CONFIG_EFS_FS is not set<br /># CONFIG_CRAMFS is not set<br /># CONFIG_VXFS_FS is not set<br /># CONFIG_HPFS_FS is not set<br /># CONFIG_QNX4FS_FS is not set<br /># CONFIG_SYSV_FS is not set<br /># CONFIG_UFS_FS is not set<br /><br />#<br /># Network File Systems<br />#<br /># CONFIG_NFS_FS is not set<br /># CONFIG_NFSD is not set<br /># CONFIG_SMB_FS is not set<br />CONFIG_CIFS=m<br /># CONFIG_CIFS_STATS is not set<br /># CONFIG_CIFS_WEAK_PW_HASH is not set<br /># CONFIG_CIFS_XATTR is not set<br /># CONFIG_CIFS_DEBUG2 is not set<br /># CONFIG_CIFS_EXPERIMENTAL is not set<br /># CONFIG_NCP_FS is not set<br /># CONFIG_CODA_FS is not set<br /># CONFIG_AFS_FS is not set<br /># CONFIG_9P_FS is not set<br /><br />#<br /># Partition Types<br />#<br />CONFIG_PARTITION_ADVANCED=y<br /># CONFIG_ACORN_PARTITION is not set<br /># CONFIG_OSF_PARTITION is not set<br /># CONFIG_AMIGA_PARTITION is not set<br /># CONFIG_ATARI_PARTITION is not set<br /># CONFIG_MAC_PARTITION is not set<br />CONFIG_MSDOS_PARTITION=y<br /># CONFIG_BSD_DISKLABEL is not set<br /># CONFIG_MINIX_SUBPARTITION is not set<br /># CONFIG_SOLARIS_X86_PARTITION is not set<br /># CONFIG_UNIXWARE_DISKLABEL is not set<br /># CONFIG_LDM_PARTITION is not set<br /># CONFIG_SGI_PARTITION is not set<br /># CONFIG_ULTRIX_PARTITION is not set<br /># CONFIG_SUN_PARTITION is not set<br /># CONFIG_KARMA_PARTITION is not set<br /># CONFIG_EFI_PARTITION is not set<br /><br />#<br /># Native Language Support<br />#<br />CONFIG_NLS=m<br />CONFIG_NLS_DEFAULT="iso8859-15"<br /># CONFIG_NLS_CODEPAGE_437 is not set<br /># CONFIG_NLS_CODEPAGE_737 is not set<br /># CONFIG_NLS_CODEPAGE_775 is not set<br />CONFIG_NLS_CODEPAGE_850=m<br /># CONFIG_NLS_CODEPAGE_852 is not set<br /># CONFIG_NLS_CODEPAGE_855 is not set<br /># CONFIG_NLS_CODEPAGE_857 is not set<br /># CONFIG_NLS_CODEPAGE_860 is not set<br /># CONFIG_NLS_CODEPAGE_861 is not set<br /># CONFIG_NLS_CODEPAGE_862 is not set<br /># CONFIG_NLS_CODEPAGE_863 is not set<br /># CONFIG_NLS_CODEPAGE_864 is not set<br /># CONFIG_NLS_CODEPAGE_865 is not set<br /># CONFIG_NLS_CODEPAGE_866 is not set<br /># CONFIG_NLS_CODEPAGE_869 is not set<br /># CONFIG_NLS_CODEPAGE_936 is not set<br /># CONFIG_NLS_CODEPAGE_950 is not set<br /># CONFIG_NLS_CODEPAGE_932 is not set<br /># CONFIG_NLS_CODEPAGE_949 is not set<br /># CONFIG_NLS_CODEPAGE_874 is not set<br /># CONFIG_NLS_ISO8859_8 is not set<br /># CONFIG_NLS_CODEPAGE_1250 is not set<br /># CONFIG_NLS_CODEPAGE_1251 is not set<br /># CONFIG_NLS_ASCII is not set<br /># CONFIG_NLS_ISO8859_1 is not set<br /># CONFIG_NLS_ISO8859_2 is not set<br /># CONFIG_NLS_ISO8859_3 is not set<br /># CONFIG_NLS_ISO8859_4 is not set<br /># CONFIG_NLS_ISO8859_5 is not set<br /># CONFIG_NLS_ISO8859_6 is not set<br /># CONFIG_NLS_ISO8859_7 is not set<br /># CONFIG_NLS_ISO8859_9 is not set<br /># CONFIG_NLS_ISO8859_13 is not set<br /># CONFIG_NLS_ISO8859_14 is not set<br />CONFIG_NLS_ISO8859_15=m<br /># CONFIG_NLS_KOI8_R is not set<br /># CONFIG_NLS_KOI8_U is not set<br />CONFIG_NLS_UTF8=m<br /><br />#<br /># Instrumentation Support<br />#<br /># CONFIG_PROFILING is not set<br /># CONFIG_KPROBES is not set<br /><br />#<br /># Kernel hacking<br />#<br />CONFIG_TRACE_IRQFLAGS_SUPPORT=y<br /># CONFIG_PRINTK_TIME is not set<br />CONFIG_MAGIC_SYSRQ=y<br />CONFIG_UNUSED_SYMBOLS=y<br /># CONFIG_DEBUG_KERNEL is not set<br />CONFIG_LOG_BUF_SHIFT=14<br />CONFIG_DEBUG_BUGVERBOSE=y<br /># CONFIG_DEBUG_FS is not set<br /># CONFIG_UNWIND_INFO is not set<br />CONFIG_EARLY_PRINTK=y<br />CONFIG_X86_FIND_SMP_CONFIG=y<br />CONFIG_X86_MPPARSE=y<br />CONFIG_DOUBLEFAULT=y<br /><br />#<br /># Security options<br />#<br /># CONFIG_KEYS is not set<br /># CONFIG_SECURITY is not set<br /><br />#<br /># Cryptographic options<br />#<br /># CONFIG_CRYPTO is not set<br /><br />#<br /># Hardware crypto devices<br />#<br /><br />#<br /># Library routines<br />#<br /># CONFIG_CRC_CCITT is not set<br /># CONFIG_CRC16 is not set<br />CONFIG_CRC32=y<br /># CONFIG_LIBCRC32C is not set<br />CONFIG_ZLIB_INFLATE=m<br />CONFIG_PLIST=y<br />CONFIG_GENERIC_HARDIRQS=y<br />CONFIG_GENERIC_IRQ_PROBE=y<br />CONFIG_X86_BIOS_REBOOT=y<br />CONFIG_KTIME_SCALAR=y<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116534679701632859?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165334216865565862006-12-04T16:43:00.000+01:002006-12-19T13:50:23.022+01:00La tarjeta de red que lleva el Q25 es: 0000:02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)<br /><br />Esta tarjeta está soportada por el kernel, al menos la versión que yo voy a utilizar v2.6.18.3.<br /><br />Device Drivers -> Network device support -><br /> [*] Network device support<br /><br />Device Drivers -> Network device support -> Ethernet (10 or 100Mbit) -><br /> [*] Ethernet (10 or 100Mbit)<br /> <m> Generic Media Independent Interface device suppor<br /> [*] EISA, VLB, PCI and on board controllers<br /> <m> Intel(R) PRO/100+ support<br /><br />Ya cargamos los módulos necesaríos: mii, e100<br />Module Size Used by<br />e100 28040 0<br />mii 4352 1 e100<br /><br />y con dmesg vemos que la tarjeta está reconocida:<br />e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI<br />e100: Copyright(c) 1999-2005 Intel Corporation<br />ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11<br />PCI: setting IRQ 11 as level-triggered<br />ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11<br />e100: eth0: e100_probe: addr 0xe0201000, irq 11, MAC addr XX:XX:XX:XX:XX:XX<br />e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex<br /><br />Configuramos la tarjeta. En /etc/sysconfig/network-devices creamos el directorio ifconfig.eth0, y en este nuevo directorio el fichero ipv4:<br />ONBOOT=yes<br />SERVICE=ipv4-static<br />IP=192.168.1.15<br />GATEWAY=192.168.1.1<br />PREFIX=24<br />BROADCAST=255.255.255.0<br /><br />Paramos y arrancamos el script de inicio:<br />/etc/rc.d/init.d/network stop<br /></m></m>/etc/rc.d/init.d/network start<br /><br />Para comprobar que está correcto: ip addr<br />2: eth0: <broadcast,multicast,up,10000> mtu 1500 qdisc pfifo_fast qlen 1000<br /> link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff<br /> inet 192.168.1.15/24 brd 255.255.255.0 scope global eth0<br /><br />Para que siempre la tarjeta de red RJ45 sea eth0 hacemos lo siguiente:<br />borramos /etc/udev/rules.d/75-persistent-net-generator.rules<br />y creamos /etc/udev/rules.d/70-persistent-net.rules con la siguiente linea: SUBSYSTEM=="net", SYSFS{address}=="DIRECCION_MAC", NAME="eth0"<br /><br />Para saber la DIRECCION_MAC: cat /sys/class/net/eth0/address o con ip addre campo link/ether<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116533421686556586?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1165333352941016922006-12-04T16:38:00.000+01:002006-12-05T20:31:00.763+01:00Ya he terminado los pasos, sólo me falta el kernel.<br /><br />Por ahora, sólo quiero que me funcione la tarjeta de red, más tarde iré añadiendo el resto de opciones.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116533335294101692?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1164832604206424312006-11-29T21:23:00.000+01:002006-11-29T21:36:44.216+01:00Cuando llega el paso<span style="font-weight: bold;"> </span>6.14. E2fsprogs-1.39, yo voy realmente a instalar el reiserfsprogs-3.6.19. Para ver las instrucciones me voy a <a href="http://www.linuxfromscratch.org/blfs/view/svn/postlfs/filesystems.html#reiserfs">BLFS</a>. Lo sigo pero hacer el make me da este error:<br />../include/reiserfs_fs.h:41:27: error: asm/unaligned.h: No such file or directory<br /><br />El fichero no existe en /usr/include/asm.<br /><br />Para solucionarlo he desempaquetado los fuentes del kernel y copiar el fichero cp include/asm-i386/unaligned.h /usr/include/asm<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116483260420642431?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1164661082430344312006-11-27T21:44:00.000+01:002006-11-28T00:02:30.183+01:00Vamos a instalar la versión de desarrollo.<br /><br />Nos vamos a crear nuestro sistema en otra partición, sino que directamente creamos el directorio:<br />mkdir /lfs<br /><br />Exportamos la variable de entorno que nos indica donde está nuestro lfs:<span style="font-family:monospace;"><br /></span>export LFS=/lfs<br /><br />Creamos los directorios para las fuentes:<br />mkdir -v $LFS/sources<br />chmod -v a+wt $LFS/sources<br /><span style="font-family:monospace;"></span><br />Y nos bajamos las fuentes y parches, para ello creamos un script:<br /><br />#!/bin/bash<br /><br />LISTA="<br />http://ftp.gnu.org/gnu/autoconf/autoconf-2.61.tar.bz2<br />http://ftp.gnu.org/gnu/automake/automake-1.10.tar.bz2<br />http://ftp.gnu.org/gnu/bash/bash-3.2.tar.gz<br />http://ftp.gnu.org/gnu/bash/bash-doc-3.2.tar.gz<br />http://download-east.oracle.com/berkeley-db/db-4.5.20.tar.gz<br />http://ftp.gnu.org/gnu/binutils/binutils-2.17.tar.bz2<br />http://ftp.gnu.org/gnu/bison/bison-2.3.tar.bz2<br />http://www.bzip.org/1.0.3/bzip2-1.0.3.tar.gz<br />http://ftp.gnu.org/gnu/coreutils/coreutils-6.6.tar.bz2<br />http://ftp.gnu.org/gnu/dejagnu/dejagnu-1.4.4.tar.gz<br />http://ftp.gnu.org/gnu/diffutils/diffutils-2.8.1.tar.gz<br />http://prdownloads.sourceforge.net/e2fsprogs/e2fsprogs-1.39.tar.gz?download<br />http://expect.nist.gov/src/expect-5.43.0.tar.gz<br />ftp://ftp.gw.com/mirrors/pub/unix/file/file-4.18.tar.gz<br />http://ftp.gnu.org/gnu/findutils/findutils-4.2.28.tar.gz<br />http://prdownloads.sourceforge.net/flex/flex-2.5.33.tar.bz2?download<br />http://ftp.gnu.org/gnu/gawk/gawk-3.1.5.tar.bz2<br />http://ftp.gnu.org/gnu/gcc/gcc-4.1.1/gcc-4.1.1.tar.bz2<br />http://ftp.gnu.org/gnu/gettext/gettext-0.16.tar.gz<br />http://ftp.gnu.org/gnu/glibc/glibc-2.5.tar.bz2<br />http://ftp.gnu.org/gnu/glibc/glibc-libidn-2.5.tar.bz2<br />http://ftp.gnu.org/gnu/grep/grep-2.5.1a.tar.bz2<br />http://ftp.gnu.org/gnu/groff/groff-1.18.1.4.tar.gz<br />ftp://alpha.gnu.org/gnu/grub/grub-0.97.tar.gz<br />ftp://alpha.gnu.org/gnu/gzip/gzip-1.3.5.tar.gz<br />http://www.sethwklein.net/projects/iana-etc/downloads/iana-etc-2.20.tar.bz2<br />http://ftp.gnu.org/gnu/inetutils/inetutils-1.5.tar.gz<br />http://developer.osdl.org/dev/iproute2/download/iproute2-2.6.18-061002.tar.gz<br />http://www.kernel.org/pub/linux/utils/kbd/kbd-1.12.tar.bz2<br />http://www.greenwoodsoftware.com/less/less-394.tar.gz<br />http://www.linuxfromscratch.org/lfs/downloads/development/lfs-bootscripts-20060712.tar.bz2<br />http://ftp.gnu.org/gnu/libtool/libtool-1.5.22.tar.gz<br />http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.18.3.tar.bz2<br />http://ftp.gnu.org/gnu/m4/m4-1.4.8.tar.bz2<br />http://ftp.gnu.org/gnu/make/make-3.81.tar.bz2<br />http://savannah.nongnu.org/download/man-db/man-db-2.4.3.tar.gz<br />http://www.kernel.org/pub/linux/docs/manpages/man-pages-2.42.tar.bz2<br />ftp://ftp.mktemp.org/pub/mktemp/mktemp-1.5.tar.gz<br />http://www.kerneltools.org/pub/downloads/module-init-tools/module-init-tools-3.2.2.tar.bz2<br />ftp://invisible-island.net/ncurses/ncurses-5.5.tar.gz<br />http://ftp.gnu.org/gnu/patch/patch-2.5.4.tar.gz<br />http://ftp.funet.fi/pub/CPAN/src/perl-5.8.8.tar.bz2<br />http://procps.sourceforge.net/procps-3.2.7.tar.gz<br />http://prdownloads.sourceforge.net/psmisc/psmisc-22.3.tar.gz?download<br />http://ftp.gnu.org/gnu/readline/readline-5.2.tar.gz<br />http://ftp.gnu.org/gnu/sed/sed-4.1.5.tar.gz<br />ftp://ftp.pld.org.pl/software/shadow/shadow-4.0.17.tar.bz2<br />http://www.infodrom.org/projects/sysklogd/download/sysklogd-1.4.1.tar.gz<br />ftp://ftp.cistron.nl/pub/people/miquels/sysvinit/sysvinit-2.86.tar.gz<br />http://ftp.gnu.org/gnu/tar/tar-1.16.tar.bz2<br />http://prdownloads.sourceforge.net/tcl/tcl8.4.14-src.tar.gz?download<br />http://ftp.gnu.org/gnu/texinfo/texinfo-4.8a.tar.bz2<br />http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev-103.tar.bz2<br />http://www.linuxfromscratch.org/lfs/downloads/development/udev-config-20061021.tar.bz2<br />http://www.kernel.org/pub/linux/utils/util-linux/util-linux-2.12r.tar.bz2<br />ftp://ftp.vim.org/pub/vim/unix/vim-7.0.tar.bz2<br />ftp://ftp.vim.org/pub/vim/extra/vim-7.0-lang.tar.gz<br />http://www.zlib.net/zlib-1.2.3.tar.gz<br />http://www.linuxfromscratch.org/patches/lfs/development/bash-3.2-fixes-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/bzip2-1.0.3-bzgrep_security-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/bzip2-1.0.3-install_docs-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/coreutils-6.6-i18n-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/coreutils-6.6-suppress_uptime_kill_su-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/coreutils-6.6-uname-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/diffutils-2.8.1-i18n-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/expect-5.43.0-spawn-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/gawk-3.1.5-segfault_fix-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/gcc-4.1.1-specs-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/grep-2.5.1a-redhat_fixes-2.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/groff-1.18.1.4-debian_fixes-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/grub-0.97-disk_geometry-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/gzip-1.3.5-security_fixes-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/inetutils-1.5-no_server_man_pages-2.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/kbd-1.12-backspace-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/kbd-1.12-gcc4_fixes-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/less-394-signal_fix-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/linux-2.6.18.3-unifdef-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/mktemp-1.5-add_tempfile-3.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/module-init-tools-3.2.2-modprobe-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/ncurses-5.5-fixes-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/perl-5.8.8-libc-2.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/sysklogd-1.4.1-8bit-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/sysklogd-1.4.1-fixes-2.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/texinfo-4.8a-multibyte-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/texinfo-4.8a-tempfile_fix-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/util-linux-2.12r-cramfs-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/util-linux-2.12r-lseek-1.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/vim-7.0-fixes-14.patch<br />http://www.linuxfromscratch.org/patches/lfs/development/vim-7.0-mandir-1.patch<br />"<br /><br />for src in $LISTA<br />do<br />wget "$src"<br />done<br /><br />Nosotros el sistema de ficheros que vamos a utilizar es ReiserFS, por tanto nos bajamos el fuente<span class="application">: http://ftp.namesys.com/pub/reiserfsprogs/reiserfsprogs-3.6.19.tar.gz<br /><br />A partir de aquí seguir las instrucciones.<br /></span><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116466108243034431?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0tag:blogger.com,1999:blog-37808321.post-1164658159392563592006-11-27T21:07:00.000+01:002006-11-27T21:12:36.700+01:00Primero instalamos un distribución de linux, yo, por ejemplo, he instalado slackware. Hay que instalar los paquetes de desarrollo, como por ejemplo, gcc, make....<br /><br />Una vez instalado con éxito echamos un vistazo a las caracteristicas del Q25 con lspci:<br />0000:00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)<br />0000:00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)<br />0000:00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)<br />0000:00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)<br />0000:00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)<br />0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)<br />0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)<br />0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)<br />0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)<br />0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)<br />0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)<br />0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)<br />0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)<br />0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)<br />0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)<br />0000:02:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)<br />0000:02:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)<br />0000:02:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)<br />0000:02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)<br />0000:02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/37808321-116465815939256359?l=lfs-q25.blogspot.com' alt='' /></div>Toletumhttp://www.blogger.com/profile/10178012692586710434noreply@blogger.com0